Brüel & Kjaer

Showing 1–16 of 16 results
Part Number Brand Description Actions
2270S Brüel & Kjaer Hand-held analyzer Type 2270-S (including basic sound analysis and third-octave/octave frequency analysis and two-channel option), basic accessory kit UA-1710-D01, Power supply ZG-0426, wind screen UA-1650, 1 year license for PC software BZ-5503-012 Lithium Ion Battery. Contained in product. UN3481 - PI967 Sec. II
4391 Brüel & Kjaer General Purpose Charge Accelerometer (1 pC/ms-2), rugged TNC top connector without cable
4507-B-004 Brüel & Kjaer ThetaShear DeltaTron Miniature Accelerometer, 10 mV/ms-2 (100 mV/g), TEDS, side mount, 3 mounting slots, without cable
4524-B Brüel & Kjaer Triaxial IEPE accelerometer, 100 mV/g, with TEDS
5704-W1-4-02-A-0100 Brüel & Kjaer Ex Explosion-proof accelerometer with internal 2 kHz low-pass filter, 10 m AC0087 cable, with 3 m PTFE protective conduit, open ends Marking: II 1 G Ex ia IIC T6/T4 Ga Tu = -40°C to +75°C (for T6) DEMKO 12 ATEX 1160776X
8341 Brüel & Kjaer Industrial IEPE Accelerometer, 100 mV/g, Connection at the top, hermetically sealed, without cable
920 Brüel & Kjaer VIBROCONTROL 920 measuring and monitoring electronics Power supply 115/230 VAC and +24 VDC
AS-022 Brüel & Kjaer Vibration acceleration sensor For stationary use, 5 m integral cable Open cable end, no cable protection Sensitivity 100 mV/g Temperature range -50...+125°C Sensor supply -24 VDC MaterialNo.: C001346.01
ASA-022/050/0 Brüel & Kjaer ASA-022 Vibration Acceleration Sensor For use in hazardous areas, 5 m integral cable Open cable end, without cable protection Sensitivity: 100 mV/g Sensor supply: -24 VDC Marking: II 2 G Ex ia IIC T6 Gb (Tu at T6: -20°C ... +70°C) II 2 D Ex ia IIIC T85 °C .... T145 °C Db Order code: ASA-022/050/0
CV-101-2-AC Brüel & Kjaer VIBROCONTROL 6000 Compact monitor Two-channel monitoring electronics for top-hat rail mounting - IP 20 Power supply 115/230 VAC 50/60 Hz 2x signal path CV-101.
ds822.ds1003/10/039/013/010/000/0 +ds822.ec100/40/0+ds822.od110 Brüel & Kjaer Displacement sensor,ds822.ds1003/10/039/013/010/000/0+ds822.ec100/40/0+ds822.od110
IN-081/4/070/50/0/205 Brüel & Kjaer Non-contact displacement sensor with continuous thread with integrated oscillator
IN083/4/070/50/0/207 Brüel & Kjaer Non-contact displacement sensor for rear mounting with integrated oscillator
SM-610-112 Brüel & Kjaer Monitoring module
VC-1100-C11 Brüel & Kjaer VIBROCONTROL 1100 Type C11 with standard settings Vibration measurement and monitoring electronics. With 8 Hz frequency response linearization for speed sensors. Power supply: 115/230 VAC Order code: VC-1100-C11
VS-068 1/1/1/071 Brüel & Kjaer Vibration velocity meter, measuring direction horizontal, "Bruel & Kjær Vibro" type VS-068 1/1/1/071, sensitivity 100 mV/mm/s, operating temperature range -34 °C to +100 °C, cable length 5 m, threaded hole for M10 mounting