Balluff
BES01W2
Sensor inductive BES R01ZC-PAC70B-BP00.2-GS04 Dimension = 32 x 20 x 8 mm | Design = 32x20x8 | installation = flush | Reach = 7mm | Switching output = PNP normally open/closed (NO/NC)| switching frequency = 150 Hz | Case Material = Zinc, Die Cast | Active surface, material = PA 12 | Connection = cable with connector, M12x1 connector, 4-pin, 0.20 m, PUR | Operating voltage Ub = 10...30 VDC | Ambient temperature = -25...70 °C | Degree of protection = IP67 | Approval/Conformity = CE, UKCA, cULus, EA
Specifications
| Part Number |
BES01W2
|
|---|---|
| Manufacturer | Balluff |
| Catalog ID | 253388 |
| Deutsch | Sensor induktiv BES R01ZC-PAC70B-BP00.2-GS04 Abmessung = 32 x 20 x 8 mm | Bauform = 32x20x8 | Einbau = bündig | Reichweite = 7 mm | Schaltausgang = PNP Schließer/Öffner (NO/NC)| Schaltfrequenz = 150 Hz | Gehäusematerial = Zink, Druckguss | Aktive Fläche, Material = PA 12 | Anschluss = Kabel mit Steckverbinder, M12x1-Stecker, 4-polig, 0.20 m, PUR | Betriebsspannung Ub = 10...30 VDC | Umgebungstemperatur = -25...70 °C | Schutzart = IP67 | Zulassung/Konformität = CE, UKCA, cULus, EAC, WEEE |
| Italiano | Sensore induttivo BES R01ZC-PAC70B-BP00.2-GS04 Dimensione = 32 x 20 x 8 mm | Disegno = 32x20x8 | installazione = risciacquare | Portata = 7 mm | Uscita di commutazione = PNP normalmente aperto/chiuso (NA/NC)| frequenza di commutazione = 150 Hz | Materiale della cassa = zinco, pressofuso | Superficie attiva, materiale = PA 12 | Collegamento = cavo con connettore, connettore M12x1, 4 pin, 0,20 m, PUR | Tensione di esercizio Ub = 10...30 VDC | Temperatura ambiente = -25...70 °C | Grado di protezion |
| Francais | - |
Request Quote
Add to enquiry basket. No obligation, free quote within 24h.
