In a sheet‑metal stamping line the Harting control unit with its dedicated software is mounted directly on the main drive of the press. It receives the position command from the plant PLC, then continuously regulates the motor torque and speed while the die opens, closes and returns to its neutral position. By handling the acceleration curves and the hold phase, the controller guarantees that each punch stroke repeats with the same timing and force, which is essential for maintaining tight tolerances on complex profiles. The built‑in diagnostics alert the operator when a deviation occurs, allowing a quick adjustment before the next batch starts. Because the unit communicates over standard field‑bus protocols, it can be linked to the overall line supervision system, providing real‑time data for cycle‑time analysis and predictive maintenance. In a nearby tire‑building plant the same controller is used on the feeding rollers that advance the green‑casing material; the precise speed control prevents slippage and ensures a uniform lay‑up before the curing stage. This integration keeps the stamping press running at maximum throughput while preserving part quality.