Results for "Motor&start=50"
Showing 151–200 of 214 results
| Part Number ▲ | Manufacturer | Description | Actions |
|---|---|---|---|
| 6ZB2480-0AD00 | Siemens | FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE | |
| 6ZB2480-0CD00 | Siemens | FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE | |
| 6ZB2480-0CF00 | Siemens | FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE | |
| 7KB1117-8AA | Siemens | FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE | |
| ACS800 | ABB | ACS800-104-0580-7+C126+E205+Q950 ype code ACS800-104-0580-7+C126+E205+Q950 Input voltage 690V Output current (Icont.max) 486 A Typical motor power (Pcont.max) 450 kW Frame Size R8i Dimensions (HxWxD) 1397x245x596 mm Net Weight 130 kg Standard Features Inverter module Control board outside of the module Coated circuit boards IGBT with TIM foil (thermal interface material) Filters E205 Du/dt limitation by choke Safety features Q950 Preventation of unexpected start-up Fan control C | |
| ADXL0045600 | Lovato | Soft Motor Starter ADXL - 45A (22 kW) with Bypass Relay Weight: 2.1 kg | |
| AQ0025F8030P3200E0M ex.(EZ0025KNNB025A0)) | Bernard Controls | Alternatively for EZ0025KNMB030A0, as the EZ series is no longer available. AQ0025-30sec-220-230V AC-50 / 60Hz Prewired Positioner BC Actuator Type 4Q002518091 Protection Class: lP68 (2ml24h), Operating Mode: 54-50% Operating Time: 30sec for g0''max. Torque: 250Nm Torque: 125Nm Motor voltage: 220-230V 1 ph. 50 / 60H2 Motor power: 0,04kW Rated current: 1,14 Starting current: 1,4A Output flange lSO521l: Combination flange F07 / F10, Wiring diagram: WD_500097_FREN, Positioner: analog input and outp | |
| ATS48D62Y | SCHNEIDER | KEY WEICH START (SOFT STATER) TYP STANDARD EINSATZ Altistart 48 Leistung 440 VAC, IN = 52A, 30 KW P / STARTER MOTOR 40CV / 440 VAAC POWER CONTROL 110-230VAC | |
| BFS260/60-KBT5NZ+816 | Brinkmann | Screw pump with motor -6,0 kW F IP 55 IE3} 3x380V, 50Hz. Special version: special voltage 380V. Spindles with high-strength coating. SIC bushing assembled with subsequent parts. Screw pump for pressureless start-up. The pump must be secured to the specified maximum permissible operating pressure. Weight: 85 kg | |
| BFS480/20-NFKOZ+671 | Brinkmann | High pressure submersible pump with 7.5 kW motor, F, IP55, IE3. 3x400V, 50Hz. Screw pump for pressureless start-up. The pump must be secured to the specified maximum permissible operating pressure.. Weight: 150 kg/Pc | |
| CA3-16C | SPRECHER+SCHUH | Motor starter | |
| CO205381 | Telema | Starting resistance for 98kW motor in 2 stainless steel case type 2M3.5 | |
| DIL0M | Klockner Moeller | Motor Starter / Contact | |
| DIL1M | Klockner Moeller | Motor Starter / Contact | |
| DSP800/6-8 | Woods | Tower motor fan diameter 800mm, fan speed 6/8 pole, 925/700rpm, electrical supply 380-420 volts 50hz 3phase, rated motor power 2.1/1.1KW, full load current 5.74/3.73A, starting current 24/7A, F22 | |
| FH1412A66-EW9MV+322 | Brinkmann | Booster pump with motor 11.0 kW F IP 55 IE3 A 3x400V, 50Hz, for Y/A start-up special version : PTC thermistor temperature sensor motor connector 11-pole compl. with mating connector for loops | |
| FH1710A57+001 | Brinkmann | Booster pump with motor 11.0 kW F IP55 IE3 3x400V, 50 Hz, for Y / start-up. Net weight: 133 kg / piece. Tariff No .: 84137075 | |
| HMCP150T4C | CUTLER HAMMER | Series C, F-frame Motor Circuit Protector, Three-pole, NEMA size 4 starter, 600V, 250 Vdc maximum, Non-aluminum line and load terminals, 150A, 450-1500A magnetic trip. | |
| K0000001 ex.(05868) | J.D. Neuhaus | Kit vane with starting aid (5 pc) for motor NM25TI | |
| K0000009 ex.(00013858) | J.D. Neuhaus | Kit vane with starting aid (6 pc) for motor NM3BI | |
| LUB12 | Telemecanique | Distribution Unit. Starter for three-phase electric motor, 12A and auxiliary contacts: 2NO; action: not reversible, Tesys U | |
| MA 160 L6 | FIMET | ASYNCHRONOUS THREE-PHASE MOTOR WITH WOUND ROTOR - DESIGN B3 POWER 7.5KW 6 POLES 955 RPM SUPPLY VOLTAGE 500V/289V 50HZ - PROTECTION DEGREE IP66 TO MOTOR IP68 TO TERMINAL BOARD FREE OUTGOING CABLES FOR MT 1,5 STARTING FROM THE BASE | |
| MCC-PE4 | AEG | Kasten Automatic Star / Delta starter diagram "N" (attached AEG drwing) including door and accessories. Engine dates: HP50; HZ50; 380V DELTA; A67; RPM2951 type SV18 | |
| R2347.83-01 | Telema | Starting resistance for press motor P=40.4Kw, V2=150V, I2=173A | |
| SAL902/290-MV+211 | Brinkmann | Sink submersible pump with motor 6,0kW F IP 55, IE3. 3x400V, 50Hz, for Y / Start.Special version: Motor connection plug 6-pole only motor part | |
| SAL902/290-MV+211 (ex.CTZ-SAL902/290-MVZ+229) | Brinkmann | Submersible pump with motor 6.0 kW F IP 55 IE3 3x400V, 50Hz, for Y-start Special version: Motor connection plug 6-pin only motor part | |
| SFC1120/390-W9MVXZ+502 | Brinkmann | Cutter pump with motor 6.3kW F,IE3 3x460V±10%, 60Hz, for {/} start DIN EN 60034-1 (Zone B) prepared for interchangeable flange Special version : 3~ three-phase triangle 2-pole Pump motor with "UL Recognized Component Mark" USA according to UL1004-1 and Canada according to CSA 22.2 No.100-14 PTC thermistor 10-pin motor connection plug only motor part Axial ventilation - clockwise rotation (on fan hood seen) Nema Premium efficiency, CC no. CC311B acc. to 10C.F.R. §431 Net weight: | |
| SFL 1550/440-CM3W9MV+439 | Brinkmann | Suctioning immersion pump with motor, 7.5 kW IP55 F. IE3 3x400V, 50Hz, for Y / start-up, net weight: 129 kg/Pc. | |
| SFL1150/460 -W9MVZ+283 (ex.SFL1150/460+283) | Brinkmann | Suctioning immersion pump with motor 4,0 kW F IP55, IE2, 3x400V, 50Hz, for Y / start Special design: 3-phase delta 2-pole PTC temperature sensor Motor connector 10-pole motor part only | |
| SFL1150/460-CM3W9MVXZ+511 | Brinkmann | Sipping submersible pump with motor. 4.0 kW, F, IP 55, IE3. 3x380V, 50Hz, prepared for Y start for interchangeable flange | |
| SFL1150/460-W9MVZ+285 | Brinkmann | Sink submersible pump with motor 4,0 kW F IP55, IE3. 3x400V, 50Hz, for Y / -start. | |
| SFL1350/440-CM3+511 | Brinkmann | SFL1350/440 Submersible slurping pump with motor5,5 kW F IP 55IE3} 3x380V, 50Hz, prepared for {/} start-up for change-over flangeSpecial design :special voltage 380V3~ three-phase current triangle 2-pole PTC thermistor temperature sensor motor connector plug 10-pole only motor part axial ventilation - clockwise rotation (as seen on fan cover)pumping unit in wear-resistant alloy | |
| SFL1350/440-CM3W9MVXZ+511 | Brinkmann | Sipping submersible pump with motor. 5.5kW, F, IP 55, IE3. 3x380V, 50Hz, prepared for Y start for interchangeable flange | |
| SFL1550/440-CM3+2011 | Brinkmann | SFL1550/440 Slurping submersible pump with motor7.5 kW F IP 55IE3} 3x380V, 50Hz, prepared for {/} start-up for exchange flangeSpecial design :Special voltage 380V PTC thermistor temperature sensorMotor connector 11-pin only motor partAxial ventilation - clockwise rotation (seen on fan cover)Pump unit in wear-resistant alloy | |
| SFL1550/440-CM3+2011 | Brinkmann | SFL1550/440 Slurping submersible pump with motor7.5 kW F IP 55IE3} 3x380V, 50Hz, prepared for {/} start-up for exchange flangeSpecial design :Special voltage 380V PTC thermistor temperature sensorMotor connector 11-pin only motor partAxial ventilation - clockwise rotation (seen on fan cover)Pump unit in wear-resistant alloy | |
| SFL1550/440-CM3W9MVXZ+2011 | Brinkmann | Slurp submersible pump with motor 7.5 kW, F, IP 55, IE3. 3x380V, 50Hz, for Y-start, prepared for interchangeable flange. 127 kg. | |
| SFL1550/440-CM3W9MVXZ+2011 | Brinkmann | Slurp submersible pump with motor 7.5 kW, F, IP 55, IE3. 3x380V, 50Hz, for Y-start, prepared for interchangeable flange. 127 kg. | |
| SFL1550/440-W9MV+218 | Brinkmann | Sink submersible with motor 7.5 kW F IP55 IE3 3x400V, 50Hz, for Y startup Motor connection plug 11-pole only motor part | |
| SFL1850/440+218 | Brinkmann | Submersible pump with motor 9.0 kW F IP 55 IE3 ? 3x400V, 50Hz, for ?/? start Special version: PTC thermistor temperature sensor 11-pin motor connector (motor unit only) | |
| SFL1850/440-CM3W9MVXZ+2011 | Brinkmann | Submersible slurp pump with motor 9.0 kW, F, IP55, IE3. 3x380V, 50Hz, for Y / -start prepared for interchangeable flange Special design: Special voltage 380V PTC thermistor Motor connection plug 11-pin only motor part Axial ventilation - clockwise rotation (seen on fan cover) Pump tube made of wear-resistant alloy | |
| SFL1850/440-CM3W9MVXZ+2011 | Brinkmann | Slurp submersible pump with motor 9.0 kW, F, IP 55IE3. 3x380V, 50Hz, for Y start. prepared for interchangeable flange. Net weight: 133.5 kg. | |
| SFL1850/440-Q40CM3+166 | Brinkmann | Submersible slurp pump with motor. 9.0 kW, F, IP55. IE3. 3x400V, 50Hz, for Y / -start.Special design: Pump tube in wear-resistant alloy, whisk, approx. 50mm distance from suction cover, maximum volume flow 1700 l / min emulsion, 900l / min oil | |
| SFL1850/440-Q40CM3+166 (ex.SFC1850/440-CM3 16) | Brinkmann | Shallow submersible pump with motor 9.0 KW F IP55 IE3. 3x400V, 50Hz, for Y / start-up. Net weight: about 138 kg / piece. | |
| SFL2350/470-CM3XZ+511 | Brinkmann | Sipping submersible pump with motor. 18.5kW, F, IP 55, IE3. 3x380V, 50Hz, for Y-start, prepared for interchangeable flange. 152 kg. | |
| SFL2350/470-CM3XZ+511 | Brinkmann | Sipping submersible pump with motor. 18.5kW, F, IP 55, IE3. 3x380V, 50Hz, for Y-start, prepared for interchangeable flange. 152 kg. | |
| SFT 1300/490-W9MV+218 | Brinkmann | Free-flow submersible pump with motor 6,5kW F IP55 IE3 3x400V, 50Hz, for Y / -start. Attention: Plate 400x400 and screws M12x25 enclosed loose. Weight: 134.4 kg. | |
| SFT 1350/490-W9MV+224 | Brinkmann | Free-flow submersible pump with motor. 9.0 kW F IP55 IE3. 3x400V, 50Hz, for Y / Start .. Weight: 171 kg / piece. | |
| SFT1300/490-W9MV+218 | Brinkmann | Free-flow tau pump with motor 6.5 kW F IP55 IE3 3x400V, 50Hz, for Y / start-up Motor connection plug 11-pole only motor part Plate 400x400, screws M12x25 a. Slices loosely attached | |
| SFT1300/490-W9MV+218 | Brinkmann | Free-flow submersible pump with motor 6.5 kW, F, IP 55. IE3. 3x400V, 50Hz, for Y / -start Special design: PTC thermistor Motor connection plug 11-pin only motor part Danger: Plate 400x400 and screws M12x25 loose attached. | |
| SQ2SKNO3OMBOD24BOAOAOKIB + 7500523 ex.(SQ25KN025NB0024B0A0A0K1B) | Bernard Controls | SQ25-30sec-230V1 -ph.50Hz-Cl. I I I + MinigamL5270BC-DEUFRA - variable speed drive, type SQ25 setting time: 30 sec for 90 °, starting torque: 250 Nm, running torque: 140 Nm, motor voltage: 230V 1-ph. 50Hz, motor power: 0.03 KW, nominal current: 0.6 A, starting current: 0.9 A, output flange: ISO 521 1: combination flange F07l10. 2 additional travel switches, heating 230 V # Minigam + compact positioner for control with an input signal 0 (4) - 20 mA or 0-10V. The signal can be programmed by micros |