Results for "Tubo"
Showing 2251–2300 of 4,616 results
| Part Number ▲ | Brand | Description | Actions |
|---|---|---|---|
| B818089420548 | Parker | 3/8" Gas Hose | |
| B818100023445 | Parker | Air hose size 1 831-6.3 black | |
| B818100023449 | Parker | Air duct TP GR.2 831-9.5 Black | |
| B818100023453 | Parker | Black air hose 831-12.7 | |
| B818240525401 | Parker | End piece for hose size 2 NW6 | |
| B818240525404 | Parker | End piece for hose NW13 | |
| BA15D | OSRAM | Lamp, tube 110 volts, 10 watts, att. 20 x 53 mm | |
| BA4200-A2057-T2-V2+ DA2420-B20196-L22 | labom | Pressure gauge with bourdon tube in chemical version, housing: NG 100 according to EN 837-1 S1, design: IP 65, process connection bottom according to data sheet D2-026, process connection: G 1/2 B, indication range: 0 ... 6 bar, marking: on Scale, see below *** please specify! ***, Device mounting: rear edge for wall mounting, MEMBRANE PRESSURE MEDIA for general applications, flange design according to data sheet D5-030, sealing surface according to DIN EN 1092-1 form B2 (according to DIN 2526 f | |
| BCF604-O4 | Funke | Tube heat exchanger BCF604-O-4 | |
| Bekomat 20 | Festo | Pipe | |
| BH4-61 | Parker | NPTF male quick coupling, 1/2 "brass pipe | |
| BI1,5-EG08K-AP6X-H1341 | Turck | Inductive sensor Threaded tube, M8 x 1 Stainless steel, 1.4305 (AISI 303) DC 3-wire, 10...30 VDC N/O contact, PNP output Plug connector, M12 x 1 Rated switching distance: 1.5 mm, flush | |
| BI3U-MT12EE-AP6X-H1141 | Turck | 1634246 Threaded tube, M12 x 1 brass, PTFE-coated DC 3-wire, 10 ... 30 VDC normally open, PNP output Connector, M12 x 1 Factor 1 for all metals Degree of protection IP68 Magnetically resistant Extended temperature range High switching frequency Rated switching distance: 3 mm , flush | |
| BI5-EM18-AP6/S907 | Turck | Inductively sensor with pipe plug in fitting M18 x 1, 10-30 VDC, cable 2 m, for temperature to + 160° C | |
| BK935-20-SA/1 | Braunwarth | Hose reel with tube | |
| BLENM10-316 | Parker | Connector A-Lok tube ext-.D=10mm, steel | |
| BLENM6-316 | Parker | Connector A-Lok tube ext-.D=6mm, steel | |
| BLENM8-316 | Parker | Connector A-Lok tube ext-.D=8mm, steel | |
| BLM-TA-VL400/M300 | KSR-Kübler | Without display Sensor bypass attachment magnetostrictive type BLM-TA Standard (-40°C to 125°C) (media temperature) Housing material: stainless steel IP68 LCD display: None Electrical connection: Cable entry NPT 1/2" Output signal: 4-20 mA - HART Ver. 6 Housing arrangement: straight at the top Sliding tube: Ø 12 mm Measuring range: 300mm Tube length: 400 mm Weight: 1.1kg *** Additional ordering information: with 2 x fastening material for sensor mounting on MRA and MNAV with C Pro | |
| BLM-TB-VL600/M300 | KSR-Kübler | With display Sensor bypass attachment magnetostrictive type BLM-TB Standard (-40°C to 125°C) (media temperature) Housing material: stainless steel IP68 LCD display: with Electrical connection: Cable gland M20x1.5 mm Output signal: 4-20 mA - HART Ver. 6 Case arrangement: Straight at the top - case at 3 o''clock / 90° Sliding tube: Ø 12 mm Measuring range: 300mm Pipe length: 600mm Weight: 1.2kg *** Additional ordering information: with 2 x fastening material for sensor mounting on MR | |
| BM 01631 | BM Group | Cable lug type tube terminal, material tind copper non insulated section 25mm2 hole dia 6mm brand bm part no bm 01631 | |
| BM01855 | BM Group | Cable Lug SEZ. CABLE R F 35/50 mmq.50 NOT INSULATED TINNED COPPER PIPE DIAM. HOLE SCREW TYPE mm.14 BM 01855 | |
| BO704 | Brovind | Pipe B0704, 12.5x38 SP=2mm | |
| BOASUPRA265INAISI321 | Venturi Ulisse | Flexible hose type BOA SUPRA 265 in AISI 321, external braid, AISI 304 - all tightened, swivel, adjustable, PN 16, DN 150 - AISI 304 | |
| BRSCHL-08-16 | Plasser | Brake air pipe for Plasser 08-16 | |
| BSH-R48 | PMA | Robot pipe clamp | |
| BSPT100 | Günther Klaus | Resistance thermometer type BS PT 100, blade WM 60 F, 1/2 DIN KL. B, semiconductor circuit, protective tube 1.4571, nominal length 530 mm, space requirement length 400 mm, connection head form B, mounting G=1/2A | |
| BSS48 | PMA | Hose cover part | |
| BSV VCPVFPKE000 G3/8-22 TYP II | Ecolab | Bottom suction valve (ball valve) Housing: PVC, valve: PVDF, seals: FPM, Ball(s): Ceramic, Connection thread: G3/8 "a, Connection set (fixed cone) f PE hose 4/6mm (Øi/Øa) | |
| BTL0MEJ | Balluff | Magnetostrictive position measuring system BTL7-E100-M0225-B-S32 Configuration: Interface 4…20 mA, power supply 24 VDC, interface details output increasing, mechanical design assembly with O-ring, 10.2 mm protective tube diameter, Plug connector, axial, M16, 8-pin, measuring length in mm 225 mm, no special design | |
| BTL156W | Balluff | Micropulse displacement transducer BTL7-E570-M0100-K-SR32 (EX BTL5-E17-M100-K-SR32) interface 4…20 mA, power supply 10…30 VDC potential bound, interface details output falling, mechanical design 10,2 mm protection tube diameter, plug connector plug, radial, M16, 8 poles, measuring length in mm 100 mm.form=rod compact series, mounting=flange Ø18h6 plus holes, housing material=stainless steel (1st.4305), position encoder, number max.=1, connection = connector, M16x0.75, 8-pole, analog output = ana | |
| BTL163J | Balluff | Micropulse displacement transducer BTL7-E570-M0150-K-SR32 (EX BTL5-E17-M150-K-SR32) interface 4...20 mA, power supply 10...30 VDC potential bound, interface details output falling, mechanical design 10,2 mm protection tube diameter, plug connector plug, radial, M16, 8 poles, measuring length in mm 150 mm.form=rod compact series, mounting=flange Ø18h6 plus holes, housing material=stainless steel (1st.4305), position encoder, number max.=1, connection = connector, M16x0.75, 8-pole, analog output = | |
| BTL2HYN | Balluff | Magnetostrictive position measuring system BTL7-E570-M0180-K-SR32 (EX BTL5-E17-M180-K-SR32) Interface 4...20 mA, power supply 10...30 VDC potential-bound, interface details output falling, mechanical design 10.2 mm protection tube diameter, connector plug, radial, M16, 8 poles, measuring length in mm 180 mm. | |
| BTL7-E100-M0710-B-S32 | Balluff | BTL0WF9. Micropulse transducer BTL7-E100-M0710-B-S32 Configuration: Interface 4 ... 20 mA Voltage supply 24 VDC non-floating Interface details. Output rising Mechanical design assembly with O-ring, 10.2 mm protective tube diameter Connector plug, axial, M16, 8-pin, measuring length in mm 710 mm | |
| BTL7-E500-M0150-B-KA05 (ex. BTL5-E10-M0150-B-KA05) | Balluff | Magnetostrictive position measuring system BTL7-E500-M0150-B-KA05 Configuration: Interface 4...20 mA, power supply 10...30 VDC, interface details output rising, mechanical design mounting with O-ring, 10.2 mm protective tube diameter, Connecting cable material: PUR, cable outlet: axial, cable length in m 5.00 m, measuring length in mm 150 mm, no special version Replaces version BTL5-E10-M0150-B-KA0 These products are specially manufactured according to customer specifications and for this rea | |
| BUSSOLA SPECIALE PER FISS. TUBO COMBUST. | Unitec Spare Parts (Part 1) | FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE | |
| C002 | Harris & Bruno | Tube 1/2" | |
| C003 | Harris & Bruno | Tube 3/4" | |
| C007 | Harris & Bruno | Tube 1/2" | |
| C01 | Teaflex | Pipe bend C, 90°, AD 16mm | |
| C04 | Teaflex | Pipe bend C, 90°, AD 32mm | |
| C06 | Teaflex | Pipe bend C, 90°, AD 50mm | |
| C09 | Teaflex | Pipe bend C, 90°, AD 25mm | |
| C1-122504 | WEH | Quick coupling female, Model TW711, for tube of diameter 8mm, ogive diameter 9mm, code C1-122504, with external body in RED color. | |
| C1-122505 | WEH | Female Quick-release coupling model TW711, for tube of diameter 8mm, ogive diameter 9mm, code C1-122505, with external body in BLU. | |
| C1-136725 | WEH | TW800 for tube Ø16.0mm, bead Ø18mm (VW standard 7800) quick adapter WEH® INOX / INOX QUICK CONNECTOR TW800, C1-136725 FOR PIPE OUTSIDE Ø 16 MM FOR CORNER Ø 18MM (CONNECTION ACCORDING TO VW NORM 78007 FORM A OR "FIG. 5" DEVICE NO. C1-136725 ALL PARTS RUST RESISTANT - SIZE 4 - LINE STRAIGHT G3/8" IT ACTIVATION: HANDLE SLEEVE MANUAL GASKETS: EPDM TEST MEDIUM: GLYCOL 100°C TEST PRESSURE: MAX. 8 BAR | |
| C10 | Teaflex | Pipe bend C, 90°, AD 40mm | |
| C1A785M | Glynwed | Tubing HDPE 100 SDR11 PN16 400 mm thickness 36.3 mm Drw: YE-001-37-005-EDW-00001 | |
| C1A7866 | Glynwed | Tubing HDPE 100 SDR11 PN16 125 mm Dicke 11,4 mm Drw: YE-001-37-005-EDW-00001 | |
| C1A786E | Glynwed | Tubing HDPE 100 SDR11 PN16 10" - 315 mm thickness 36.3 mm Drw: YE-001-37-005-EDW-00001 |