Escogear
Showing 1–11 of 11 results
| Part Number ▲ | Brand | Description | Actions |
|---|---|---|---|
| CCO55 FA | Escogear | Gear couplings, according to dimension sheet A314 | |
| CST 55 | Escogear | Gear coupling | |
| CST 80 | Escogear | Gear coupling, hub bore (on both sides) Pilot hole D = 38 mm, hub length (on both sides): E = 67 mm, coupling length: A = 140 mm | |
| CST-30 | Escogear | Joint, hole1: 19mm H7; hole 2: 28mm H7 | |
| CST-80-2Nuten | Escogear | Gear couplings | |
| CST-80-SP-2Nuten | Escogear | Toothed coupling | |
| CST55 | Escogear | Coupling unbored | |
| CST55 drilled | Escogear | Coupling drilled and knotted | |
| CST65 | Escogear | Tooth coupling A310 Kg9,1 | |
| DPUSS 75-110 | Escogear | Disk packs for ESCODISC steel disk clutch, Type: DPUSS 75-110, according to dimension sheet A121 Please note: two plate packs are required per coupling Nominal coupling torque: 2,200 Nm Peak torque: 3,320 Nm Max. Permissible angular displacement: 0.5 degrees Weight approx. 3 kg / piece | |
| DPUSS 75-110 G250 | Escogear | Steel plate clutch Type: DPUSS 75-110 G250 according to dimension sheet A121 Nominal coupling torque: 2,200 Nm Peak torque: 3,320 Nm Max. Permissible angular displacement: 2 x 0.5 degrees Bore on the pump side: Ø 55 mm H7 with 1 groove according to DIN 6885/1 Bore on motor side: Ø 85 mm H7 with 1 groove according to DIN 6885/1 Intermediate piece (spacer) Shaft distance: G = 250 mm Weight approx. 25 kg / piece |