HBM

Showing 1–50 of 409 results
Part Number Manufacturer Description Actions
1-MVD2555 HBM Measuring amplifier with integrated digital indicator 4.8kHz carrier frequency, for DMS and inductive transducers for half and full bridge circuit
1-VK20A HBM Terminal box for EMC-compliant interconnection of Torque Transducers
3-3301.0159 HBM 3-3301.0159. Cable 12-pin male female / free ends PVC, 10m. Transducer connection cable, 10 m, (Binder 680-free ends)
K-U15-50K0-SB-S-P-G-J HBM Force transducer
T20WN/20NM HBM Torque transducer, rated torque 20Nm, DMS measuring system with built-in speed and angle sensors
T22/10N HBM Torque transducer, nominal torque 10 Nm DMS measuring system Rated speed of 16,000 min-1 Accuracy Class 0.5 Measuring signal transmission without contact
-T12-S200Q-S-L-DF1-C-1-N-N-U HBM Transducer
-T12-SETUP-USB HBM Setup tool kit for T12/T12HP PCAN-USB adapter, CAN/bus connection cable, 6 m
1 AP03 HBM Connection panel
1-4411.0114 HBM Coupling membrane
1-AB22A HBM Sensor
1-ABM75 HBM Aluminum foil for for DMS applications, 11 sheets 205 x 100mm
1-ABX22A HBM Remote display for MGC
1-ABX22A HBM Display and control unit
1-AD103C (ex. AD102) HBM Digital Transducer electronics for metering applications. Communication via RS 232 interface. Operating voltage 5 V DC stabilized. 10000d test certificate for Class III scales, 0.5 uV / e OIML.
1-AE101 HBM DC voltage measurement amplifier
1-AE301 HBM Evaluation tool
1-AE301 HBM Air conditioner, +/-10VDC, 15...26VD
1-AE301S6 HBM Carrier frequency amplifier 600HZ frequency range 2Hz from +0.1 bis 5mV/V internal adjustable analogue output +/- 10V supply voltage +15V to 30V DC in Clip housing for the mounting DIN EN 50022
1-AED9501A (ex. AED9101A) HBM Housing for AD103C Interfaces: CAN bus or DeviceNet Operating voltage range 10 to 30 V Dimensions: 200x65x40mm
1-AP402I HBM Connection board for measuring voltage 0-60V and current 30MA
1-AP402I (Ex.AP801S6) HBM Connection board for measuring voltage 0-10V with power supply
1-AP4181 HBM Sensor
1-AP460I HBM Connection board for pulse counter/frequency
1-AP71 HBM Connection board for CAN J1939 message monitoring
1-AP75 HBM Sensor
1-AP78 HBM Sensor
1-AP801S6 HBM Connection plate for Multi-channel amplifier
1-AP8101 HBM Sensor
1-AP814BI HBM 8-channel connection board for strain gauges (in quarter-bridge configuration (3-wire technology) with internal complementary resistors 120 ohms, 350 ohms, 700 ohms) TEDS sensor detection
1-AP815I HBM Connecting plate for 8 DMS with 4 Wires for T-ID e TEDS
1-AP815I HBM Connection board for strain gages 1/4, 1/2 and full bridge measurement
1-BL01 HBM Rack slot cover plate with screw
1-BL12A HBM Front slot cover with electrical connection for remote display
1-C10/100KN HBM C10 load cell for compression forces, nominal force 100 kN, nominal sensitivity 4 ... 5 mV / V
1-C10/50KN HBM C10 load cell for compression forces, nominal force 100kN, Rated output 4 ... 5 mV / V, nominal force 50 kN, nominal sensitivity 4 ... 5 mV / V
1-C18/200KN HBM Force transducers for compressive load, nominal force 200 kN, DMS measuring system 4000 Ohm, compact dimensions, measuring body of stainless steel
1-C2/10T HBM Load Cell
1-C2/1T HBM Load cell Rated load: 1t Accuracy class: 0.1 Measuring body: Stainless steel Protection class: IP67 according to EN 60529 Cable Type: Screened 6-core round cable, thermoplastic elastomer Cable length: 3m
1-C2/2KN HBM HBM force transducers, nominal force 2 kN
1-C2/500kg HBM Load cell Rated load: 500kg Accuracy class: 0.1 Measuring body: stainless steel Protection class: IP67 according to EN 60529 Cable Type: Screened 6-core round cable, thermoplastic elastomer Cable length: 3m
1-C2/500N HBM HBM force transducers, Nennkaft 500 N DMS measuring system for compressive load flat design, made of stainless materials Accuracy class 0.2 enclosed test report with fix mounted connection cable 3 m long, with free ends
1-C2/5T (ex.C2 2t-5t) HBM Load cell Rated load: 5t Accuracy class: 0.1 Measuring body: Stainless steel Protection class: IP67 according to EN 60529 Cable: Shielded 6-core round cable, thermoplastic elastomer Cable length: 6m
1-C9B/2KN HBM Force transducer; 2kN, cable 1,5m
1-C9C/0.5KN HBM Miniature force transducer for compressive forces. Accuracy class 0.2. Strain gage measurement system. Integrated cable, 1.5 m long Miniature force transducer for compressive forces. Accuracy class 0.2. Strain gage measurement system.Integrated cable, 1.5 m long Nominal (rated) force 0.5 kN. Nominal (rated) sensitivity 1 mV/V. Stainless steel
1-C9C/1KN (ex.C98/1KN) HBM Miniature force transducer for compression applications Accuracy class 0.2 DMS measuring system Integrated cable, 1.5 m long Nominal force 1 kN Nominal sensitivity of 1 mV / V Made of non-rusting materials
1-C9C/200N HBM Thumbnail - force transducer for compression applications
1-C9C/20KN HBM Miniature force transducer for compression applications, accuracy class 0.2
1-C9C/50KN HBM Miniature force transducer for compressive forces Accuracy class 0.2 DMS measuring system Integrated cable, 1.5 m long Nominal force 0.5 kN Nominal value 1 mV / V Made of rustproof material
1-C9C50/KN HBM Miniature pressure transducer C9C / 50kN. Weight: 260 g.