Wema

Showing 1–22 of 22 results
Part Number Manufacturer Description Actions
F9,4X234MM HEATING CARTRIDGE HP10 230V 320W Wema High-performance heating, geschliffen.Ø9,4 x 234mm, 320W, 230V, A = 1000mm glass insulated nickel wire-
Hochleistungsheizpatronen, geschliffen Wema Ø 10 x 360 mm 1000W 230V A = 500 mm glass silk insulated nickel wires led out from the inside up to 350 °C resitant Diameter tolerance: -0,01/-0,06 mm Power tolerance: ± 10 % length tolerance: ± 1,5 %
PT100 Wema Resistance sensor PT 100 Ohm DIN Measuring tip: Ø 8 x 12 mm 118° A=2000 mm Measuring point: potential Bayonet cap: inside - Ø 14.5 mm Spring length: 180 mm made of stainless steel connecting cable: Glass fiber insulated thermal cable 0.22 mm² (black + / White -) Armor mesh made of soft galvanized iron wires
S2320/30x40 Wema Ejector fuse
S3115/20x600x20ic Wema Tempering element flat. RL20Fx600ic completely INOX
S3119/6x100 Wema Self-locking temperature control element
S3119/6x14 Wema Self-locking temperature control element
S4141 / 12 x 76 x 2 x 15,5 Wema Sprue bush for separating side sprues.
S4142/12x36 Wema Angus holding bush
S5101/10x250x1000x1000 Wema High-performance cartridge heaters, ground Ø 10 x 250mm 1000W 230V A= 1000 mm fiberglass insulated from the inside Nickel strand resistant up to max. 350 °C Diameter tolerance: -0.01/-0.06 mm Power tolerance: ± 10% Length tolerance: ± 1.5% Important: An H7- tolerance are provided
S5101/16x300x1000x1000 Wema High-performance cartridge heaters, ground Ø 16 x 300mm 1000W 230V A= 1000 mm fiberglass insulated from the inside Nickel strand resistant up to max. 350 °C Diameter tolerance: -0.01/-0.06 mm Power tolerance: ± 10% Length tolerance: ± 1.5% Important: An H7- tolerance are provided
S5101/6,5x60x250x1000 Wema High-performance heating cartridges, ground Ø 6.5 x 60 mm 250 W 230 V A = 1000 mm from the inside with glass fiber insulation Nickel strand resistant up to max. 350 ° C Diameter tolerance: -0.01 / -0.06 mm Power tolerance: ± 10% Length tolerance: ± 1.5% Important: for the mounting hole of the heating cartridge an H7 tolerance can be provided
S5407/M12 Wema Mounting nut M12 Sch.-Ø 14 mm Bore-Ø 8.4 mm L= 30 mm Hexagon / SW17 for thermocouple Weight: 0.027kg
S6405/10 Wema Slide bar safety RCR10
S6502/100 Wema Air valve with needle. VASP C
S6502/200 Wema Air valve with needle. VASP L
S7101/1 Wema Cycle counter, CVR-X-W
S7102/1 Wema Cycle counter, CVRL-X-W
S7110 Wema Cycle counter 48x38x26 CVPL-200-W. Weight: 0,041 kg/Pc
S7110/48x38x26 Wema Cycle counter, CVPL-200-W
TF2012/8 PT100 Wema Resistance sensor Pt100 4-wire Measuring tip: Ø 8 mm; 118° A=3000mm without screw-in nipple Spring length: 195 mm made of stainless steel Temperature max. 400°C
Ø 16x300 mm 700 W 230 V Wema High-performance cartridge heaters, ground Ø 16 x 300mm 700W 230V A = 1000 mm fiberglass insulated from the inside Nickel strand resistant up to max. 350 °C Diameter tolerance: -0.01/-0.06 mm Power tolerance: ± 10% Length tolerance: ± 1.5%