Possible Applications
The power driver on the automotive assembly line receives the Apex socket insert to engage fastener heads. Operators lock the insert into the tool’s chuck, where it matches the exact hex profile of the bolt used on chassis brackets and suspension mounts. As the driver rotates, the insert transmits torque directly to the fastener, achieving the prescribed tightness without slippage. Because the insert is interchangeable, crews can switch sizes in seconds when moving from one sub‑assembly to the next, keeping the takt time steady. The insert’s wear‑resistant surface maintains contact integrity even after thousands of cycles, reducing the need for frequent re‑calibration of the torque tool. In a typical cell, the insert remains seated while the robot positions the part, then releases once the joint is secured, allowing the next component to be fed into the line. This repeatable action supports consistent joint quality across high‑volume production of automotive components.
Apex
14mm03
Wrench Socket Drive: 3/8" IVKT Output: SW 14 ISKT Length: 22,2mm
Specifications
| Part Number |
14mm03
|
|---|---|
| Manufacturer | Apex |
| Deutsch | Steckschluesseleinsatz Antrieb: 3/8" IVKT Abtrieb: SW 14 ISKT Länge: 22,2mm |
| Italiano | Inserto per chiave a bussola Guida: 3/8" IVKT Uscita: SW 14 ISKT Lunghezza: 22,2mm |