During the production of sheet‑metal dies, the gripper arm extracts completed die halves from the stamping press and places them onto the transfer carousel for immediate inspection or further processing. By gripping the die with a controlled, repeatable force, the arm eliminates manual handling, reduces the risk of damage to delicate cutting edges, and synchronizes with the press cycle to keep the line moving without pauses. In high‑volume stamping lines, the arm is mounted on a linear guide that follows the press’s stroke, allowing it to pick the die as soon as the mold opens and hand it over to a polishing or heat‑treatment station. This precise hand‑off supports rapid changeover between part families, because the same arm can be re‑programmed to accommodate different die geometries. The same device is also employed in plant‑engineering projects where heavy equipment modules must be lifted onto conveyor belts during plant installation, providing a safe, repeatable method for moving bulky components. A typical automotive stamping facility uses the gripper arm to load finished dies directly into a CNC deburring cell, cutting the handling time per part to a few seconds.