Results for "Motor"
Showing 16601–16650 of 19,101 results
| Part Number ▲ | Brand | Description | Actions |
|---|---|---|---|
| NS125-400/370-U3D-W1 | ALLWEILER | Pump without motor, machine no. 50.4.2222, year of manufacture 1978 | |
| NS3-44-600 | AOIP | Starter | |
| NSCS 40-160/40/P25VCS4 | Lowara | Cast iron block pump with stub shaft and IEC standard motor Motor make: PLM/IE3 Speed: 2900 rpm Voltage: 380-415/660-690V 50Hz. Mechanical seal: SiC/carbon Elastomers: EPDM Impeller: stainless steel (steamed) | |
| NSCS 65-200/300/W26VCC4 | Lowara | Pump: NSCS 65-200 / 300 / W26VCC4, 0.0 kW, 3500 min-1 IE3 Block pump made of gray cast iron with stub shaft and IEC standard motor Motor make: WEG / IE3, speed: 3500 rpm, voltage: 460VD / - 60Hz, 336 kg | |
| NSM1-40-180 | Eckardt | Hydraulic motor (+/- 30) Z1S0 | |
| NSM140-12GRD/Z1/2 | Eckart | Motor oildynamic 120° | |
| NSM163-180GRD/Z1 | Eckart | Motor oildynamic 180° | |
| NST500 | Nikken | Rotary table, flat Ø500mm without motor for ANCK AC5S or 26 motor | |
| NT50-250/01 | ALLWEILER | Pump U3.1D W1, complete with base and motor, clutch, hood for clutch, wheel diameter 237 mm, H.70 MCL VEL 2900 RPM, 75 m3/h | |
| NTT 50 200 ? 160, | ALLWEILER | Pump. Motor Specification: ME, 3 kw, 380 volt, 1430 rev./min | |
| NTT 50-200 ? 160, | ALLWEILER | Pump. Motor Specification: ME 7.5 kw, 380 volt, 1430 rev./min | |
| NTT40-220 | ALLWEILER | Pump. ? 180, Motor Specification: BBC-Motor, 4 kw, 380 volt, 9.1 amp, 1420 rev./minn;Nr.7030952 | |
| NTT50-200 | ALLWEILER | Pump. ? 160, Motor Specification: BBC-ME, 11 kw, 380 volt, 2910 rev.//min;Nr7030951 | |
| NTT80-20/02U5AWA | ALLWEILER | Pump, impeller diam. 197 milimeter (ex NTT80200.197 year 1998) with excluded motor and connection | |
| NTT80-200/02U5A | ALLWEILER | Pump with motor | |
| NV24A-MP-TPC (adapt for Belimo valves) | Belimo | Communicative globe valve actuator, Actuating force 1000 N, Nominal voltage AC/DC 24 V, Control modulating, communicative DC (0)2...10 V Variable, Nominal stroke 20 mm, Conversion of sensor signals, Communication via Belimo MP-Bus, | |
| NVK-2006GL | Saginomiya | Valve without motor WGK | |
| NVK24A-MP-TPC (Ex. NVF24-MFT2-E) | Belimo | SuperCap lifting drive Rated voltage: AC / DC 24 V, 50/60 Hz Control: 3-point, continuous, MP-Bus Working range: DC 2 ... 10 V * Actuating force: 1000 N Nominal stroke: 20 mm Operating time motor: 150 s / 20 mm * Emergency function: 35 s / 20 mm | |
| NVK2510GL | Saginomiya | Valve without motor WGK | |
| NXC03005A5H0SSGA1AF0000CI | VACON | Motor, high overload: 132 kW; low overload 160kW | |
| NXC07305A5L0TSGA1AF0000CI | VACON | Motor , High overload: 355kW, low overload 400 kW | |
| NXC11505A5L0TSGA1AF0000CI | VACON | Motor, high overload: 560 kW; low overload 630kW | |
| NXS00095A2H1SSSA1A3000000 | VACON | Inverter- engine power high overload kw3 continuous current ICH (A) 7.6. Engine power, low overload KW4, continuous current IL (A) 9 128x292x190. FR4. Air cooled. 5-380-500V | |
| O12-15-0 | Wallace | Air pump and Motor Assembly complete | |
| OA8 | Deufra | Motor one phase 230VAC 2.FLLACH | |
| OAP230V | Deufra | Motor | |
| OC443090V002SL3MB | ABB | Servo motor brushless 15.1 mm permanent magnet | |
| OD1505213DS000 | REXROTH | Pump | |
| ODG 534 GF239-10 | WEG Württembergische | Motor, reduction 240:1 | |
| ODG614GB130 | WEG Württembergische | Gearmotor 0.12 kW 1360 rpm ratio: 56:1 -R, HL-Worm | |
| ODG732TD/464 | WEG Württembergische | Gearmotor Nr. 2/606/609 220-380V 0.55 kW with gearbox Type GF140-160 Ratio 8:1 | |
| OFP 32.01.01.01.01 - GGC 379 | GEC | Motor | |
| OG73RN1024- ES7R (ex 13621580 DR71 225) | Hübner | Rotary pulse encoder with axial plug connector for plug-in motor connection box, FCT-Contacts with full load - support plate | |
| OM.S160 | DANFOSS | Motor | |
| OM50 | Omil | Linear actuator modified according to drawing 35980849 for OP.155 bushing driving station on engine base line | |
| OML8M-151G2001 | DANFOSS | Hydraulikmotor | |
| OMM 32/151G0006 | DANFOSS | Hydraulic motor OMM 32 SA | |
| OMM20 | DANFOSS | Hydraulic motor | |
| OMM20SA | DANFOSS | Motor 151G0005, 16mm shaft | |
| OMM32 | DANFOSS | Hydraulic motor | |
| OMM32151G0006 | DANFOSS | gearbox motor | |
| OMM32151G0006-3 | DANFOSS | Hydraulik motor OMM32151G0006-3 | |
| OMM32S151G0006 | DANFOSS | gearbox motor | |
| OMP 32 | Sauer-Danfoss | Hydromotor A2/W25/SA/G m. LA G1/4 | |
| OMP-100-151-0612 | DANFOSS | Hydraulic motor | |
| OMP-50 (ex.151-0028) | DANFOSS | Hydraulic motor with connection | |
| OMP1001510622(exOMP1001510022) | DANFOSS | Motor | |
| OMP160151-0614 | DANFOSS | Hyd. Motor, OMP (HPS) | |
| OMP32151-0641 | DANFOSS | Hyd. Motor, OMP (HPS) | |
| OMP50 | DANFOSS | Oil motor with splined shaft SAE - 6B, OMP50 |