Results for "Ring"
Showing 51–100 of 26,307 results
| Part Number ▲ | Brand | Description | Actions |
|---|---|---|---|
| F4172F | Rekofa | Slip ring posts. For data transmission | |
| FT1814-JC24VDCL=3 | Delta | DELTA FT 1814-JC 24 V DC L=3 laser distance € 2,095.00 / piece net measuring device, Modbus TCP & 4-20 mA output with Articulated base, tube, cooling plate, 3 m connection cable (assembled on device side) | |
| GA90-S6N3 | Dosapro | Motor diaphragm metering pump, Flow rate: 83 l / h - 5 | |
| HPP2V3EMVAZ30OK | ROTECH | PB module with intermediate ring, stroke max 30 mm P + F NBB2-V3-E2 in PRB housing Ø80x70 "OPEN + CLOSE" display Vestamid black, cover Makrolon clear, Terminal plan KPS23N4S without console | |
| IM150P-D-1250-N | Debem | Vertical centrifugal pump / Vertical centrifugal pump Case / Housing: PP Length: 1250mm Mechanical seal: B O-Rings / O-Rings: EPDM Three phase motor: 4 kW, 230/400 V, 2,900 rpm / rpm | |
| JS 2-120 G10 | Varisco | Centrifugal pump VARISCO JS 2-120 G10 with bearing block and free shaft end Ø19mm | |
| KBO16-PP (exKBO 1636 PP) | INA | INA LINEAR BALL BEARING 16x26x36 KG 0,190 | |
| KD 24 - 100 . 1 | VEP | Gas spring | |
| KD 5 - 19 . 1 | VEP | Gas spring | |
| KD 5 - 32 . 1 | VEP | Gas spring | |
| MF01-045-00 | Multiformer | Axial ball bearing PTFE-GS 12,0X24,0X0,15 | |
| MF01-049-00 | Multiformer | Deep groove ball bearings 619_9_2Z | |
| MF01-051-00 | Multiformer | Bearing HK_0810 | |
| MF01-055-00 | Multiformer | Axial ball bearing PTFE-BZ 5,0X9,0X0,50 | |
| MJ/187/E | TEA | Bearing-exz = 0.5 series for skid MS; MJ/187/E | |
| NJ 208 ECP | SKF | SKF single row cylindrical roller bearing Bore 40 outside 80 width 18 | |
| NP 3085.160 SH 256( ex 3085 183 ht) | Flygt | Flygt NP 3085.160 SH 256 electric pump Pot. Nom. 2,4 kW - 400 Volt -50 Hz -3 phases 10m. SUBCAB 4G1.5 + 2x1.5 cable Pump body delivery: 80 mm. Prepared for flushing valve Materials Section: - Main casting: Gray cast iron - Shaft: AISI 431 stainless steel - Impeller: Cast iron Mechanical seals: - internal: WCCR / WCCR - external: WCCR / WCCR | |
| PFEA 112, IP65 | ABB | Railway train electronics PFEA 112, IP65 2 Load Cells Input, Voltage and Current Output A+B with adjustable filtering. Shown on display A, B, A+B, AWAY. Profibus DP. PFEA112-65, incl. a CD user manual | |
| RO ZS 01-40-XK | GE WATER PROCESS TECNOLOGIE | Filter ROSAVE.Z for reverse osmosis MATERIAL: POLYPROPYLENE, dimensions of the pores: 1?, Adapter 2 SPRING length in cm: 101.60 | |
| RV500-100-A | Special Spring | Gas pressure spring series RV VDI 3003 OSAS; USAS; OPAS | |
| V1013895 | ProMinent | O-Ring 154x3 -30/100 NBR-70S ISO3601 | |
| V1013971 | ProMinent | RW-Dichtring 40x 52x 8 BA NBR70 DIN3760 | |
| Z-564201.SKL FAG | FAG | Z-564201.SKL FAG Single row angular contact ball bearing weight and dimensions Inside (d) mm 35.00 Outside (D) mm 72.00 Width (B) mm 17.00 Weight (kg) 0.288 Product features: poetry No seal cage type S - Steel or standard cage precision standard precision pressure angle Standard pressure angle pairing No pairing axial clearance/preload No bias lubrication standard lubricant | |
| +M770650 | Hywema | Lifting nut HDV TR65 * 7 98 * 80 incl. Locking ring M456200 according to drawing WZ-01003_A0 | |
| 0 to 210 bar | Druck | Article no.: PTX5072-TB-A1-CA-H0-PA (>70 bar) pressure transmitter Measuring range: 0 to 210 bar relative pressure (sg). Output signal: 4 to 20 mA Electrical connection: DIN 43650 plug Supply voltage: 7-32V (not for ATEX) Accuracy: ±0.2% FS final value (A1) Pressure connection thread: G1/4 internal thread (PA) compensated temperature range: -20 to + 80 °C (TB) including calibration data: zero point and span (CA) no certification for use in hazardous areas (H0) | |
| 0 to 3000 psi | Druck | Article no.: PTX5072-TB-A1-CA-H0-PA(>70 bar) pressure transmitter Measuring range: 0 to 3000 psi gauge (sg). Output signal: 4 to 20 mA Electrical connection: DIN 43650 plug Supply voltage: 7-32V (not for ATEX) Accuracy: ±0.2% FS final value (A1) Pressure connection thread: G1/4 internal thread (PA) compensated temperature range: -20 to + 80 °C (TB) including calibration data: zero point and span (CA) no certification for use in hazardous areas (H0) | |
| 0 to 420 bar | Druck | Article no.: PTX5072-TB-A1-CA-H0-PA (>70 bar) pressure transmitter Measuring range: 0 to 420 bar relative pressure (sg). Output signal: 4 to 20 mA Electrical connection: DIN 43650 plug Supply voltage: 7-32V (not for ATEX) Accuracy: ±0.2% FS final value (A1) Pressure connection thread: G1/4 internal thread (PA) compensated temperature range: -20 to + 80 °C (TB) including calibration data: zero point and span (CA) no certification for use in hazardous areas (H0) | |
| 0 to 5000 psi | Druck | Article no.: PTX5072-TB-A1-CA-H0-PA (>70 bar) pressure transmitter Measuring range: 0 to 5000 psi gauge (sg). Output signal: 4 to 20 mA Electrical connection: DIN 43650 plug Supply voltage: 7-32V (not for ATEX) Accuracy: ±0.2% FS final value (A1) Pressure connection thread: G1/4 internal thread (PA) compensated temperature range: -20 to + 80 °C (TB) including calibration data: zero point and span (CA) no certification for use in hazardous areas (H0) | |
| 0,8MM | Unitec High-Tech-Industrieprod. | Solder 289-905 | |
| 0-0034145-0 | AMP | Ring terminal | |
| 0-12-005-07-000000 | Ortlinghaus | Slip ring-electromagnetic-tooth clutch | |
| 0-521-017-000-000 | Ortlinghaus | Original Ortling house pneumatically actuated multi-plate clutch Clutch torque Td 390.0 Nm Max. cylinder speed [1/min] 3,000 Ø beam bore 36.000 mm Fit carrier bore H7 groove a groove Slot width carrier slot 10.00 mm Fit groove width carrier groove P9 Groove depth carrier groove 3.30 mm Fit groove depth carrier groove +0.2 Housing shape clutch pot housing open Friction pairing steel/organic. Coating, dry running Operating pressure pcl 5.5 bar Back pressure pbs 0.5 bar Net weight pe | |
| 0.0.390.17 | ITEM | Double bearing unit 5 D6 z | |
| 0.0.390.18 | ITEM | Double bearing unit 5 D6 e | |
| 0.0.400.06 | ITEM | Timing belt tensioner counter bearing 5 R10 | |
| 0.005.61.039.00 | Kapp | Bearing | |
| 0.010.051.23.151100 | Ortlinghaus | Electric-magnetic coupling | |
| 0.01071.29 | Kleinmichel | Stationary | |
| 0.093595.P | Unitec High-Tech-Industrieprod. | Metal puffer with rubber springs Type T10 | |
| 0.110.110.0001 | ELBE | Elso no. 0.110.110.0001. Cardan Gelenkwelle.Flansch 100 6/8, tube 50x3, S = 908mm, X = 95mm.Welle black primed.When ordering speed specify.Net weight: about 9.00 kg / piece | |
| 0.110.110.0001 | G. Elbe & Sohn | Elso No.: 0.110.110.0001 Cardan shaft Flange 100 6/8 Tube 50 x 3 S = 1750 mm X = 95 mm Shaft black primed Please specify speed when ordering Net weight: approx. 13.00 kg / piece | |
| 0.110.110.0001 (S = 1760 mm X = 95 mm) | ELBE | Elso no.: 0.110.110.0001 Cardan PTO shaft Flange 100 6/8 Tube 50 x 3 S = 1760mm X = 95mm Shaft primed black When ordering, please specify speed Net weight: about 13.00 kg / piece | |
| 0.110.110.5040 | ELBE | Elso no.: 0.110.110.5040 Cardan PTO shaft Flange 100 6/8 Tube 50 x 3 S = 1760mm X = 350mm Shaft primed black Net weight: about 15.00 kg / piece When ordering, please specify speed!! | |
| 0.110.110.5040 | ELBE | Elso no.: 0.110.110.5040 Cardan PTO shaft Flange 100 6/8 Tube 50 x 3 S = 1760mm X = 350mm Shaft primed black Net weight: about 15.00 kg / piece When ordering, please specify speed | |
| 0.112.100.0201 | ELBE | Cardan drive shaft Flange 120 8/8 Tube 60 x 4S = 725 mm X = 60 mm Wave primed black Net weight: approx. 12.50 kg / piece ** Please specify speed when ordering | |
| 0.117.110.003 | ELBE | Elso no.: 0.117.110.0003 Cardan PTO shaft Flange 150 8/12 Tube 100 x 5 S = 900mm X = 110mm Shaft black primed When ordering, please specify speed Net weight: about 38.00 kg / piece | |
| 0.117.130.0003 | ELBE | Elso no.: 0.117.130.0003 Cardan PTO shaft Flange 150 8/12 S = 495mm X = 45mm Shaft primed black > Please check the lengths < > Please check the drilling pattern < When ordering, please specify speed Net weight: about 30.00 kg / piece | |
| 0.117.140.0003 | ELBE | Elso no.: 0.117.140.0003 Cardan PTO shaft Flange 150 8/12 S = 600mm X = 110mm Shaft primed black > Please check the lengths < > Please check the drilling pattern < When ordering, please specify speed Net weight: about 35.00 kg / piece | |
| 0.158.205.0001 | ELBE | Cardan joint shaft Flange 150 8/12 Tube 90 x 4 S = 1140mm When ordering please specify speed Wave black primed, 27kg / piece | |
| 0.158.205.0001 | ELBE | Cardan shaft. Flange 150 8/12. Pipe 90x4, S = 1140 mm. Wave primed in black. Weight: 27 kg / pc. Please specify speed when ordering. |