Results for "Ring"
Showing 2651–2700 of 26,307 results
| Part Number ▲ | Brand | Description | Actions |
|---|---|---|---|
| 1-MVD2555-115V | HBM | Measuring amplifier with integrated digital display, 4.8kHz carrier frequency, for strain gauge and inductive sensors, for half and full bridge circuits, piezoresistive sensors, as well as LVDTs, potentiometer output ± 10 V, ± 20 mA or 4-20 mA - 4 limit values adjustable - 2 peak value memories, functions: positive; negative; Peak-to-peak 10-digit alphanumeric LCD display with backlighting ± 199.999- 8 parameter memories- low-pass filter 0.05-500 Hz- RS232 computer / printer interface for contro | |
| 1-MX1601B-R | HBM | SomatXR: Standard measuring amplifier | |
| 1-MX840B-R | HBM | SomatXR: Universal measuring amplifier | |
| 1-N 120 | Unitec High-Tech-Industrieprod. | Flexible disc | |
| 1-N 132 | SGF | Joint washer: 1-N 132 Outside Ø: 149 mm Center hole Ø: 52 mm Pitch circle Ø: 110 mm Infill thickness: 25.8 mm Bolt hole inside Ø: 12 mm (6 pieces with ring sleeve reinforcement) | |
| 1-NG150 | HBM | Covering agent (approx. 0.75 ltr.) | |
| 1-P3MBP/500BAR | HBM | Absolute pressure measurement system: strain gauges 350 Ohm Measuring range: 500 bar Accuracy class: 0.1 Electrical connection via Kabel3m output: 2 mV / V Protection: IP67 according to IEC 60529 | |
| 1-RM4220 | HBM | Measuring amplifier, 4-20mA, 10V | |
| 1-RTN/100T/VEN | HBM | Rubber-metal bearings completely for RTN, rated load: 100T, material: steel, galvanized, elastomeric material: Chloroprene rubber | |
| 1-RTN0.05/100T | HBM | Ring torsional load cell | |
| 1-RTN0.05/100T (ex.RTH0.5/100T) | HBM | Ring-load cell, rated load: 100t, Accuracy class: 0.05, Meßkörpermaterial: stainless steel, protection class: IP68 according to EN 60529 | |
| 1-RTN0.05/2.2T | HBM | Ring torsion load cell | |
| 1-RTN0.05/4.7T | HBM | Ring torsion load cell | |
| 1-S2M/50N-1 | HBM | Load cell series S, nominal force 50 N for tensile and compressive load.Completeness class 0.02 with strain gage Measuring system low overall height, overload protection, non-load sensitive, six-wire circuit estmonted connection cable 6 m long, | |
| 1-SK5/55 | HBM | Ring collectors | |
| 1-SLB700A/06-1 | HBM | 1-SLB700A/06-1 Extensometer SLB700a with 6m cable Extensometer, with strain gauge measuring system Nominal elongation 500 µm/m Nominal characteristic value 1.5 mV/V screw-on, permanently attached connection cable 6 m long, with free ends | |
| 1-SLB700A/06VA1-1 | HBM | 1-SLB700A/06VA1-1 Extensometer with 0-10V output Extensometer with strain gauge measuring system, Nominal elongation 500 µm/m Output: 0 to 10V, screwable, Fixed cable, 6 m long. | |
| 1-SLB700A/06VA2-1 | HBM | 1-SLB700A/06VA2-1 Strain transducer with 4-20mA output Extensometer with strain gauge measuring system, Nominal elongation 500 µm/m Output: 4 to 20mA, screwable, Fixed cable, 6 m long. | |
| 1-SLB700A/12-1 | HBM | 1-SLB700A/12-1 Extensometer SLB700a with 12m cable Extensometer, with strain gauge measuring system Nominal elongation 500 µm/m Nominal characteristic value 1.5 mV/V screw-on, permanently attached connection cable 12 m long, with free ends | |
| 1-T5/100NM | HBM | Torque measuring shaft rated torque | |
| 1-T5/10NM | HBM | Torque transducer; Nominal torque 10 Nm, measurement signal transmission via slip rings, DMS measuring system | |
| 1-T5/20NM | HBM | Torque transducer, nominal torque 20 Nm, measurement signal transmission via slip rings, DMS measuring system | |
| 1-TB1A-500NM | HBM | DMS measuring system | |
| 1-U3/20KN | HBM | HBM load cell, nominal force 20 kN for tensile and compressive load with strain gauge measuring system, made of stainless materials integrated shear force compensator accuracy class 0.2 permanently mounted 6-wire connection cable 3 m long, with free ends | |
| 1-U3/20KN | HBM | HBM load cell, nominal force 20 kN for tensile and compressive load with strain gauge measuring system, made of stainless material integrated shear force compensatorAccuracy class 0.2fixed 6-core connecting cable3 m long, with free ends | |
| 1-U3/50KN | HBM | Force transducer, nominal force 50kN strain gauge measuring system for tensikle and compressive loading made from stainless materials, integrated lateral force compensation accuracy class 0,2 fixed 6-wire connection cable 3 m long with free ends | |
| 1-U9C/20kN | HBM | Miniature force transducers for tensile and compressive forces. Accuracy class 0.2. DMS measuring system Intergrietes cable, 1.5m long. Nominal force 20 kN, nominal sensitivity 1 mV / V. | |
| 1-U9C/50N | HBM | Miniature force transducer for tensile and compressive forces, accuracy class 0.2, strain gauge measuring system, integrated cable, 1.5m long, nominal force 50N Nominal value 1 mV / V Made of non-corrosive materials | |
| 1-WI/2MM-T | HBM | Miniature displacement transducer WI series Stylus version, 8mm shaft diameter Nominal measuring path 0..2mm (+/-1mm) Nominal signal +/-40 mV/V inductive half bridge compact design 3m cable with free ends Protection class according to EN 60 529: IP 67 | |
| 1-XY41-6,0/350 | HBM | Resistor strain series Y. Measuring grid foil: constantan. Polyimide. 2 measuring grids. Resistance 350 Ohms. Measuring grid length 6mm. Maximum voltage 16V. 5 Pieces. | |
| 1-Z30A/10KN | HBM | Precision force for tensile and compressive stress Nominal force 10 kN Class 00 according to ISO 376 DMS measuring system 700 Ohm | |
| 1-Z30A/2KN | HBM | Precision force for tensile and compressive stress Nominal force 2 kN Class 00 according to ISO 376 DMS measuring system 700 Ohm | |
| 1-Z6FD1/50KG-1 | HBM | Load cell Nominal load: 50kg Minimum division value: 0.0360% of Emax OIML R60 test report Accuracy class: D1 Measuring body: stainless steel Protection class: IP68 according to EN 60529 Cable type: Shielded 6-core round cable, PVC Cable length: 3m | |
| 1.0 connector-plug-adapter | ITsoft | Mechanic contacting facility for central connector of bumpert cableset, compact-module, ESD-safe, for manual connection to the cableset, light-weight, ergonomic handling, automatic locking at insertion of bumper-connector, manual unlocking, Ingun-pins with spring crown contacts for electrical contact -> electrical contacts of cable-set-connector of bumper are not opened or strechted, connection to pdc-tester-panel via cable l=6m, connector "Harting", cable at adapter with strain relief, 2x cable | |
| 1.003.124 (7016CC) | LAG | Wheel complete wit ball bearing 150x40mm, 50mm, 47x17 mm with ball bearing 6204Z (204712), bore 20 mm | |
| 1.003.500 | FTA | Ball rollers bearing, ball diam. 15 mm, 60 kg, A=31 mm, B = 9,5 mm, D = 24 mm, F = 2,8 mm, M = 6,3 mm, L = 21,00 mm | |
| 1.003.516 | FTA | Spring clip, ball diam 15 mm, assembly drilling = 24 mm | |
| 1.052.1301.01 | Hummel | Brass closure with O-ring, PG13.5 SD/MS | |
| 1.052.1601.01 | Hummel | Brass closure with O-ring, PG16 SD/MS | |
| 1.052.2101.01 | Hummel | Brass closure with O-ring, PG21 SD/MS | |
| 1.063.464.00 | Unitec High-Tech-Industrieprod. | Axial bearing 300 x 38 | |
| 1.11.08 D 25 BN (ex.HC 9600 FDT 8H) | HYDAC | Filter element for Drukerkreis ball bearing cage and aspi Zmill8 | |
| 1.3.5300.120 | MBO | Folding roller complete with bearing, roller Nr. 135322030 Type T45 | |
| 1.4401/316 (Maschnr. 00438799) | NETZSCH | Steel ring, typ NM045BY01L06B | |
| 1.4401/316L (Maschnr. 00433169) | NETZSCH | Steel ring, typ NM053BY04S18B | |
| 1.4401/EPDM (Maschnr. 00433169) | NETZSCH | Blocking ring-SM, typ NM053BY04S18B | |
| 1.4841 | Fiberfix | Anchoring 5x60 incl. Ceramic ring | |
| 1.5H3JOS-E15C-PSPL | Crosby | Type JOS-E Spring loaded Pressure relief valve | |
| 1.695.2100.01 | Hummel | HKS-INOX Pg 21 for cable13-18mm INOX 1.4305/ with O-ring. 10st | |
| 1.HT-200-90-4K-0BSE | Westelettric | High degree of protection IP65 / IK08 - High bay luminaire HT-200-90-4K-0BSE - 90-4000-HE beam angle 90o - 60-4000-HE beam angle 60o - available with a beam angle of 60 °, 90 ° or 110 ° - color temperature: 4.000K daylight (other optional) - dimmable version - optional - 7-year warranty When ordering, |