Expert articles in root cause analysis: investigation of failures and prevention strategies.
A premature failure of a Bosch HSZ 06 A484-3X/AS1N-BS1NG24N11K4M00 spherical roller bearing was investigated. Root causes included misalignment, contamination, and insufficient lubrication. Preventive measures include…
Solenoid valve coil combustion can be prevented by limiting action cycles, improving ventilation, and optimizing thermal management. The UNITEC-D E-Catalog offers reliable replacement parts for…
A plant in Andalusia experienced a sudden failure of an Allen Bradley 2711T5A15L1 VFD motor due to induced currents in the bearings. The failure was…
This technical analysis systematically examines signal losses in encoders such as the DANFOSS DV5E-01X, focusing on causes such as cable shielding, EMC and connector degradation.…
A filter explosion can occur due to increased differential pressure, a malfunction of the bypass valve, or contamination. Determining the causes of the explosion and…
Nuisance tripping in the Bosch 44261802 thermal relay can be avoided with a rigorous technical approach. The analysis revealed that the combination of high environmental…
Knocking out gear teeth can lead to unexpected stops. Performing root cause analysis and remediation is critical. Use the UNITEC-D E-Catalog for high-quality spare parts.
SKF 21315 E seal explosion can be caused by contamination, misalignment or pressure peaks. The use of appropriate components will ensure the reliability of the…
The sudden failure of a Heidenhain ROD426E 1000/G coupling in a steel installation was due to misalignment, torque overload, and fatigue. This article analyzes the…
This article highlights the five most common causes of transmission belt overheating, including misalignment and incorrect tension. It offers systematic diagnosis, corrective actions and a…
A Heidenhain ROD1424003 1250I/G gear suffered tooth pitting and spalling, causing a production interruption. The analysis revealed causes related to lubrication, misalignment and material fatigue.
An increase in the temperature of the HYDAC 505463010152 belt indicates a malfunction. Root cause analysis reveals mechanical overload, lack of lubrication and inaccurate alignment…
