Expert articles in root cause analysis: investigation of failures and prevention strategies.
Overheating of transmission belts in production machines often leads to unplanned downtimes. The FIBRO 2052.70.040.050.050 is a critical component in the Benelux industry. The lifespan…
A Parker 421800850530 servo motor overheated due to sizing errors, incorrect load cycle estimation and cooling failure. Root cause analysis and corrective actions are recommended…
A bearing support suffered EDM damage due to VFD-induced eddy currents. Root cause analysis identified insufficient isolation and lack of filters. Preventative solutions include the…
A Heidenhain 329991-50 coupling failed after 4,200 hours due to misalignment, torque overload, and fatigue. This article provides a root cause analysis and corrective actions…
1. IntroductionIn automated manufacturing environments, the accuracy and reliability of motion control systems are essential to productivity and final product quality. Intermittent or complete failures…
1. IntroductionThe operation of modern industrial machinery depends critically on the reliability of its components. However, integrating variable frequency drives (VFDs) into motor drive systems,…
Ball screw backlash increase is a critical issue in precision motion control systems. This article investigates the root causes of backlash increase, focusing on preload…
The Schneider Electric A9Q41240 filter element failed due to abnormal differential pressure, a non-functioning bypass valve, and contaminant buildup. Insufficient preventative maintenance contributed to the…
Oil leakage in the gearbox can occur due to improper selection of seals, ventilation and assembly errors. Performing diagnostics, replacing components, and establishing a prevention…
The sticking of the DANFOSS WVFX-25 pneumatic valve is due to internal contamination, humidity and lubrication deficiencies. A root cause analysis reveals critical causes that…
A REXROTH 00573054 hydraulic cylinder exhibited fluid leakage and pressure drop. Analysis revealed that fluid contamination is the main cause. To prevent future failures, certified…
Overheating of Festo DGSL-20-100-PA servo motors causes equipment failure. Three main causes have been identified: power calculation error, incorrect duty cycle and insufficient cooling. Detailed…
