Expert root cause analysis articles for industrial equipment.
Forensic Investigation of a Coil Burnout at the Solenoid Valve FIBRO FLT 52.81.4.501. Analysis of Thermal Load, Overvoltage and Practical Diagnostic Steps for Maintenance Personnel.
Detailed analysis of the root causes of premature bearing failure under the action of high-frequency EDM currents in Rexroth HMS01 drives. Symptoms, diagnostic maps and…
Forensic analysis of the collapse of the filter element FIBRO 205270070085070 in industrial hydraulic systems. Case study on contamination peaks, bypass failure and preventive guidelines.
Forensic analysis of a failure in the winding of an industrial electric motor caused by voltage imbalance and thermal degradation of class H insulation.
Detailed engineering analysis of the causes of conveyor belt slippage, methods of diagnosing faults in Parker units and a practical checklist for technical personnel of…
Technical analysis of overheating in drive belts for machine tools. Study of the 5 main causes, temperature data, diagnostic protocol and checklist for maintenance workers.
In-depth forensic analysis of incorrectly tripping thermal relays, with focus on environmental factors, thermal drift and measurement errors in industrial installations.
Forensic analysis of stiction in a Parker 1/4MMO-S pneumatic valve in an aerospace test bench. Investigation of causes (humidity, pollution) and corrective action plan.
Overheating of servo motors can lead to temporary stop times or damage. In an incident with the Heidenhain LIYDY-CY(A)3X2X0.14+2X0.5, the cause turned out to be…
Forensic engineering analysis of a sheared shaft key in an industrial drive train, examining cyclic fatigue, fit tolerances, and corrective maintenance strategies.
A forensic analysis of the collapse of Parker 6TZ.SS filter elements highlights the causes of differential pressure peaks, sticking bypass valves and contamination. The article…
Engineering analysis of pitting and gear tooth scuffing in industrial reducers. The influence of alignment, lubrication and dynamic loads has been investigated using European standards.
