GIN

Showing 1–20 of 20 results
Part Number Manufacturer Description Actions
AEcable 2Y DSUB9 male GIN AEcable 2Y DSUB9 male - connection cable for automotive Ethernet Network interfaces IX connector on two DSUB9 connectors (male) with separated channels
AEcable 2Y HSD Zjp GIN AEcable 2Y HSD Zjp - connection cable for Ethernet network interfaces with IX connector IX connector on two HSD connector, Coding "Z", type "jack" and "plug", with separated channels
All products GIN FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE
Analogboard A8I GIN Analog board A8I - each installed in item 1
CANcable 2Y GIN CANcable 2Y for connecting the CAN / LIN channels. CANcable 2Y cable (2x 30cm) with three DSUB9 sockets for connecting the CAN / LIN Channels 1 and 2 to the Vector CAN / LIN hardware (VN8970, VN16XX, ....
CCP/XCP GIN CCP / XCP activation. Note: For the configuration of CCP / XCP an additional tool is required for reading in and converting the A2L files.
E2T2L-2 GIN Remote control E2T2L-2 (2 Taster/2 LEDs)cable length: 3,5m, Cable length: 3,5m part of pos. 1
eSATA cable eSATA connector eSATA GIN ESATA cable eSATA connector eSATAconnector 1mpart of pos. 9
G.i.N. Starter-DVD GIN G.i.N. Starter-DVD part of pos. 1/9
GL5000 GIN GL5000 Connector Kit - 81-Pol. + 40-pole+ SUB-D High Power with caps and contacts part of pos. 1
GL5370-12H GIN GL5370-12H data logger 24 x CAN / 4 x RS232 / 2 x LIN customized. - 12 x CAN (permanently equipped with 1043 high-speed transceiver) - 4 x CANFD 1043TK double GLT baby board- 4 x CANFD 1043TK GLT baby boards- 2 x LIN- 4 x RS232- A + B FlexRay- 5 x 1Gb -Ethernet (RJ45) inclusive managed switch- 2 x AUX -Plus socket- 2 x AUX -socket- 3 x USB host connection- 1 x USB device connection- 4 x analog channels- 4 x digital I / O - 4 buttons - 1 x OLED display (3 x 16 characters) - 7-50V power supply - S
GLA601 GIN GLA601 - AUX relay switch box for VN5640. Switch-on box for switching on the VN5640 via the GL5350 / GL5370 data logger. Cable length AUX connection: 0.5 m Cable length UBAT connection: 0.5 m Cable length VN5640 connection: 2.0 m Specific UBAT plug + contacts are provided by the customer
GLT-Babyboard LIN 1021 GIN GLT baby board LIN 1021. each on SER1 to SER4 from pos. 1
Hard disk GIN Hard disk cartridge without a hard disk
ISCANII GIN Flow switch 64MB flash with accessories: powersupply iscan 18v, 840mA, Cable Iscan, Kabel D-Sub 25 CL3/TG, binder cable connector, with metal body, box of joint 711
Power supply GIN Power supply 12V DC 2000mA 90264V AC with jack plug 5 x 2 mm part of pos. 9
SSD 1TB GIN SSD 1TB - 2.5 "SATA with AES - I-Temp -40 .. + 85 ° C only use for GL5xxx. Please note that the existing MLC (Multi Level Cell) technology has a reduced service life compared to SLC (Single Level Cell) technology with the same use. This storage medium is only intended for the storage of measurement data and logger configurations. A storage of copyrighted works (eg music, video, software, etc.) that require a copyright levy on storage media in accordance with §54 UrhG, is not permitted on these
SSD 1x GIN SSD readout station 1-fold - 1-fold SSD readout station for G.i.N. removable hard drives - connection to the PC via eSATA or USB 3.0 - On / off switch on the rear wall of the housing at item 8
USB 3.0 GIN USB 3.0 Extension Cable "Plug A to B" L = 1M, USB cable 3.0 Type A plug to Type B plug part of pos. 9
VN5650 GIN VN5650 Ethernet / CAN Interface - Versatile interface for analysis, simulation and test tasks in automotive Ethernet networks. The interface supports nterchangeable Physical Layer Module. The built-in modules VNmodule60 4AE1G BCM89883 support 12 ports IEEE100BASE-T1 / 1000BASE-T1. In addition, 2 channels CAN / CAN FD as well as digital / analog IO supported. Flexible and versatile use through Freely configurable / combinable switch, TAP and media conversion functionalities. Physical bypass relay