GIN

Showing 1–19 of 19 results
Part Number Brand Description Actions
AEcable 2Y DSUB9 male GIN AEcable 2Y DSUB9 male - connection cable for automotive Ethernet Network interfaces IX connector on two DSUB9 connectors (male) with separated channels
AEcable 2Y HSD Zjp GIN AEcable 2Y HSD Zjp - connection cable for Ethernet network interfaces with IX connector IX connector on two HSD connector, Coding "Z", type "jack" and "plug", with separated channels
Analogboard A8I GIN Analog board A8I - each installed in item 1
CANcable 2Y GIN CANcable 2Y for connecting the CAN / LIN channels. CANcable 2Y cable (2x 30cm) with three DSUB9 sockets for connecting the CAN / LIN Channels 1 and 2 to the Vector CAN / LIN hardware (VN8970, VN16XX, ....
CCP/XCP GIN CCP / XCP activation. Note: For the configuration of CCP / XCP an additional tool is required for reading in and converting the A2L files.
E2T2L-2 GIN Remote control E2T2L-2 (2 Taster/2 LEDs)cable length: 3,5m, Cable length: 3,5m part of pos. 1
eSATA cable eSATA connector eSATA GIN ESATA cable eSATA connector eSATAconnector 1mpart of pos. 9
G.i.N. Starter-DVD GIN G.i.N. Starter-DVD part of pos. 1/9
GL5000 GIN GL5000 Connector Kit - 81-Pol. + 40-pole+ SUB-D High Power with caps and contacts part of pos. 1
GL5370-12H GIN GL5370-12H data logger 24 x CAN / 4 x RS232 / 2 x LIN customized. - 12 x CAN (permanently equipped with 1043 high-speed transceiver) - 4 x CANFD 1043TK double GLT baby board- 4 x CANFD 1043TK GLT baby boards- 2 x LIN- 4 x RS232- A + B FlexRay- 5 x 1Gb -Ethernet (RJ45) inclusive managed switch- 2 x AUX -Plus socket- 2 x AUX -socket- 3 x USB host connection- 1 x USB device connection- 4 x analog channels- 4 x digital I / O - 4 buttons - 1 x OLED display (3 x 16 characters) - 7-50V power supply - S
GLA601 GIN GLA601 - AUX relay switch box for VN5640. Switch-on box for switching on the VN5640 via the GL5350 / GL5370 data logger. Cable length AUX connection: 0.5 m Cable length UBAT connection: 0.5 m Cable length VN5640 connection: 2.0 m Specific UBAT plug + contacts are provided by the customer
GLT-Babyboard LIN 1021 GIN GLT baby board LIN 1021. each on SER1 to SER4 from pos. 1
Hard disk GIN Hard disk cartridge without a hard disk
ISCANII GIN Flow switch 64MB flash with accessories: powersupply iscan 18v, 840mA, Cable Iscan, Kabel D-Sub 25 CL3/TG, binder cable connector, with metal body, box of joint 711
Power supply GIN Power supply 12V DC 2000mA 90264V AC with jack plug 5 x 2 mm part of pos. 9
SSD 1TB GIN SSD 1TB - 2.5 "SATA with AES - I-Temp -40 .. + 85 ° C only use for GL5xxx. Please note that the existing MLC (Multi Level Cell) technology has a reduced service life compared to SLC (Single Level Cell) technology with the same use. This storage medium is only intended for the storage of measurement data and logger configurations. A storage of copyrighted works (eg music, video, software, etc.) that require a copyright levy on storage media in accordance with §54 UrhG, is not permitted on these
SSD 1x GIN SSD readout station 1-fold - 1-fold SSD readout station for G.i.N. removable hard drives - connection to the PC via eSATA or USB 3.0 - On / off switch on the rear wall of the housing at item 8
USB 3.0 GIN USB 3.0 Extension Cable "Plug A to B" L = 1M, USB cable 3.0 Type A plug to Type B plug part of pos. 9
VN5650 GIN VN5650 Ethernet / CAN Interface - Versatile interface for analysis, simulation and test tasks in automotive Ethernet networks. The interface supports nterchangeable Physical Layer Module. The built-in modules VNmodule60 4AE1G BCM89883 support 12 ports IEEE100BASE-T1 / 1000BASE-T1. In addition, 2 channels CAN / CAN FD as well as digital / analog IO supported. Flexible and versatile use through Freely configurable / combinable switch, TAP and media conversion functionalities. Physical bypass relay