Replacing bearings for electric motors: step-by-step instructions
This instruction allows you to safely and efficiently replace bearings in electric motors. Use the specified tools and observe the safety requirements. Perform pre- and…
Technical Blog
In-depth technical analyses of industrial spare parts, MRO innovations, and engineering insights — powered by AI and reviewed by our experts.
Functional Safety in Hydraulic Systems: Prestelveld for Safety Valves and Circuits
Functional safety in hydraulic systems is crucial for the reliability and safety of industrial applications. The selection of safety valves and circuits should be made…
Root Cause Analysis of Hydraulic Cylinder Failure: Contamination, Alignment and Pressure Spikes
A failure of the Parker 937859Q hydraulic cylinder caused a production halt. The analysis identified contamination, inaccurate alignment and pressure spikes as the main causes.…
Diagnostic Guide: Temperature Measurement Discrepancies – Sensor Selection, Thermal Lag, Jumper Wire Resistance, and Transmitter Configuration
This guide covers temperature measurement discrepancies in industrial systems, including reading deviations, unexpected fluctuations, response delay, and incorrect configuration. It provides a systematic diagnostic approach,…
Maintenance guide: Reciprocating compressor - Valve plate inspection, piston ring replacement and crankcase oil replacement
This practical maintenance guide teaches you how to maintain the valve plate, piston rings and crankcase oil of a reciprocating compressor. Includes steps, safety instructions…
Coupling Selection Guide: Jaw, Disc, Gear and Fluid — Torque, Misalignment and Torsional Stiffness
Proper coupling selection is critical to the reliability of industrial facilities. This article examines the technical parameters and applicable standards for the selection of jaw,…
Gear Tooth Pitting and Spalling: Root Cause Analysis and Prevention Strategies
Gear tooth pitting and spalling in Telemecanique LC1 D1810 motor starters are linked to lubrication degradation, misalignment, and material fatigue. This article provides a root…
Compliance with regulations for food contact materials: MRO implications for the food industry
The regulations for food contact materials (EC 1935/2004) are crucial for safety and compliance in the food industry. MRO teams require specific certifications and components.…
Root Cause Analysis of Oil Leakage in Reducers: Seal Selection, Ventilation and Assembly Errors
Oil leakage in reducers can indicate critical failures such as obstructed ventilation, inadequate seals or assembly errors. Root cause analysis reveals that high internal pressure…
Industrial Applications of the Danfoss AVTA152162 Valve in Shipbuilding and the Maritime Sector
The Danfoss AVTA152162 valve is a key component in marine hydraulic systems, essential for safe and efficient operation. Its use together with other certified components…