In-depth technical articles on industrial MRO, maintenance, and procurement
Engineering analysis of corrosion mechanisms in machine tools, with guidelines for the selection of materials, calculation of the PREN and application of protective coatings according…
This technical guide covers standard-compliant shaft alignment according to DIN ISO 21940-21 and VDI 2200 with a focus on laser alignment processes, tolerance specifications and…
Effective Lockout/Tagout (LOTO) procedures are critical for preventing accidental machinery startup and uncontrolled energy release during maintenance, safeguarding personnel, and ensuring compliance with regulatory standards…
1. Introduction: an engineering problem and its impact on equipment reliability Gearboxes are critical components of industrial drives, responsible for the transmission of torque with…
Ultrasonic leak detection is the most cost-effective method to quantify and eliminate energy loss in industrial compressed air systems. This technical reference article covers the…
This technical guide addresses the selection of industrial couplings (jaw, disc, gear and hydrodynamic) with a focus on torque, misalignment and torsional rigidity, in line…
1. Introduction: The challenge of hydraulic accumulation in industrial plants Hydraulic accumulators are critical components in fluid power systems, responsible for storing energy, damping pulsations,…
Complete technical guide on the coordination of SPD Type 1, 2 and 3 surge arresters in an aeronautical and energy industrial environment. Covers sizing according…
Complete technical guide on needle roller bearings for machine tools: operating principles, sizing according to ISO 281, selection criteria, installation best practices, failure mode analysis…
This technical guide examines the selection criteria for hydraulic accumulators (bladder, piston and diaphragm accumulators) according to DIN EN 14359 and ISO 10945. It contains…
