Belimo

Showing 1–50 of 51 results
Part Number Manufacturer Description Actions
AF230 Belimo Spring return actuator AC230V
AF24-SR Belimo Servo motor, 24V-50/60Hz 6W, Ex: (FM24-SR)
AF24SR Belimo Electric motor 24-50/60 Hz. 6W (ex.FM24SR)
All products Belimo FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE
D6250W Belimo BELIMO throttle valve with tab eyes Flange PN 6/10/16, DN 250, kvmax 4200 Fitting: nodular cast iron GGG40 powder coated Closing body: stainless steel Spindle: stainless steel Spindle seal: EPDM O-ring Spindle bearings: bronze, steel, PTFE Seat: EPDM Medium temperature: -20 .. + 120 ° C Leak rate: A, tight (EN 12266-1)
D6250WL/PRCA-S2-T ex. (F6250HDU+SY3-220) Belimo Butterfly valve 2-way Model lug, flanges, DN250 Ductile iron powder coated polyester disk in 1.4301
D6300WL/PRCA-S2-T ex.(F6300HDU+SY4-220) Belimo Butterfly valve 2-way Model lug, flanges, DN300 Ductile iron powder coated polyester disk in 1.4301
D6400NL+SY6-230-3-T ex.(F6400HD+SY6-220) Belimo Butterfly valve 2-way, Jul model, DN 400, kvmax 14200 Body GGG40, Veneering. epoxy powder shutter material stainless steel 1.4301
EP150F+MP ex.(P6150W4500E-MP) Belimo Electronic 2-way ball valve with adjustable flow and sensor-operated
GM24SR Belimo Motor drive for CTA 24 VAC, torque at least 30 Nm, angle spin 95°, running time 135 s+ - 15 s, dimension. 7 VA, consumption in service 3 W, end position2 W, protection clas III, enclosure IP 54
H780N+AV24-MFT Belimo Globe valve 3 ways, PN 16 flange, DN 80m KVS 100, cap and center grey cast iron GG25, 120°C, added actuator separately 2500 N, 150 s, (75) 150..300 s regolabils, 50 mm, 24 V AC/DC, modulating, MFT command 0...10 VDC, 2....10 VDC, 0...32 V,
LF24-SR Belimo 24VAC/DC actuator with return spring and proportional control 0...10 VDC
LM24A-MP Belimo Starter
LR24A-SR-TP Belimo Valve actuator
NM24A Belimo Servomotor,
NM24A-SR(exNM24-SR) Belimo Motor AC24C 3VA, 1,3W, 8NM, 150S
NMQ24A-SR Belimo Actuator
NR24A-SR Belimo Actuator with mechanical position indicator and manual control, AC / DC 24V, 0-10V DC control, work area 2-10V DC, feedback DC2-10 V, torque 10Nm, 90s, max 95 °, 1 m cable, IP54
NV24A-MP-TPC (adapt for Belimo valves) Belimo Communicative globe valve actuator, Actuating force 1000 N, Nominal voltage AC/DC 24 V, Control modulating, communicative DC (0)2...10 V Variable, Nominal stroke 20 mm, Conversion of sensor signals, Communication via Belimo MP-Bus,
NVK24A-MP-TPC (Ex. NVF24-MFT2-E) Belimo SuperCap lifting drive Rated voltage: AC / DC 24 V, 50/60 Hz Control: 3-point, continuous, MP-Bus Working range: DC 2 ... 10 V * Actuating force: 1000 N Nominal stroke: 20 mm Operating time motor: 150 s / 20 mm * Emergency function: 35 s / 20 mm
P1000 Belimo
P6125W3100E-MP Belimo Electronic 2-way ball valve with adjustable flow and sensor-operated
P6125W3100E-MP Belimo Electr. 2-way CCV EPIV Flanges PN16, DN 125 AC / DC 24 V, modulating, MP-Bus Running time motor 90 s, flow rate 837 ... 1860 l / min, adjustable valve combination / actuator, flow sensor
R2015-6P3-S1 Belimo Valve
R2020-8P6-S2 Belimo Valve
R2025-16-S2 Belimo Valve
R2050-S4 ex.(B250) Belimo Two-way ball valve on / off, ps 1600 kPa Inner thread 2 ", DN 50, kvs 49 m³ / h Nickel plated brass Stainless steel sphere Stainless steel pin Outer ring seal EPDM PTF valve seat
R6150W320-S8 Belimo 2-way control ball valve flange PN16 DN 150, kvs 320, as a two-way valve
R680R+SR24A Belimo Spherevalve ON-OFF 2 ways, 6 PN flange, DN 80, KVS 160, body warm printed publication brass, nickel plated stopper, nickel plated brass packing PTFE/EPDM O-ring, max. 100°C, A-AB, 20 Nm, 24 V AC/DC, ON-OFF 3 points, 90 s/90°, cable PVC L = 1 mt.
S1A Belimo Control switch
S2 Belimo Accessories for drive GM24-SR, 2 x EPU. 6 (2.5) A, AC 250 V
S2A Belimo
SBG24 Belimo Range encoder for continuous drives, electrical 24V AC, 60Hz, input signal 0.10/0-20/2-10V AC, output signal 2-10V AC, operating temperature -20 - 50°C, IP54, electrical connection
SF230A-S2 (EX FS 220 S) Belimo Servo motor MOD. AF 230 (-S)
SF24A-S2 Belimo Actuator
SGF24 Belimo Potenziometer
SM110 Belimo Servomotor 5.5 VA 15NM 80S
SM230A (ex. Sm230) Belimo Actuator 220V 50 Hz with feedback potentiometer (1 kg)
SM230A-TP Belimo Actuator
SM24A+ZSMA Belimo Gear motor complete with stirrup
SM24A-SR Belimo Flap actuator with mechanical position indicator and manual adjustment, nominal voltage AC / DC 24V, 10V DC 2-work area, feedback DC2-10 V, torque 20Nm, 150s, max 95 °, 1 m cable, IP54
SM24A-SR Belimo Starter (ex64407-18E)
SM24V-24VCC Belimo Drive: 2.2 W; 15 Nm; 6 V +/- 4 V
SPRING RETURN SERVOMOTOR DAMPER UP TO 3MQ - 24V AC / DC Belimo SF24A-S2 Damper drive with emergency control function AC / DC 24 V, open-close, torque 20 Nm Running time motor 75 s, emergency control function 20 s Connection cable 1 m, with auxiliary switch 2 x EPU + Z-S mechanical accessories Base plate extension made of galvanized steel Extension from NF..A / SF..A to AF
SY4-230-3-T ex.(SY4-220) Belimo Rotary actuator for butterfly valve 400 Nm AC 230 V, On-Off, 3-point Motor rotation time 18 s IP 67, Manual drive with handle Connection with butterfly valve terminals
SY6-230-3-ex.(SY6-220) Belimo Rotary actuator for butterfly valve 650 Nm AC 230 V, On-Off, 3-point Motor rotation time 31 s IP 67, Manual drive with handle Connection with butterfly valve terminals
TF24 Belimo Spring return actuator
TRF230 Belimo Rotary Control with emergency control Mechanical position indicator AC230V; with plug; 2NM Motor 40--75s Spring 75s Max 95° Cable 1m; IP42
VFP-600 Belimo Differential pressure sensor 0-600 15 V
VFP400 Belimo Pressure transmitter