Coesfeld

Showing 1–14 of 14 results
Part Number Manufacturer Description Actions
201-125-100 Coesfeld Clamping device for tensile specimens DIN EN 527 for holding tensile specimens according to DIN EN 527
75-840-145 Coesfeld Revolving magazine for stan-dard small rods Revolving magazine for stan-dard small rods for 1 to max. 12 standard small rods 50 x 6 x 4 mm fixed manually by means of clamping spindle to notch both sides the magazine with the clamped in test rods is reversed and then clamped again
75-840-146 Coesfeld Revolving magazine for ISO standard rods for 1 to max. 12 ISO standard rods 80 x 10 x 4 mm fixed manually by means of clamping lever to notch both sides the magazine with the clamped in test rods is reversed and then clamped again for Automatic Notch Milling Machine 75-840-070: requires 75-840-220 Quick-action clamping elements when ordered for the first time for CNC Milling Machine: requires 79-101-004 Mounting plate for fixing sample magazines with quick release
75-840-210 LM Coesfeld Single-tooth notch cutter V 025 HM hard metal tool for cutting V-notches in plastics notch radius: 0.25 mm
75-840-211 LM Coesfeld Single-tooth notch cutter V 010 HMhard metal tool for cutting V-notches in plastic notch radius: 0.10 mm
75-840-212 LM Coesfeld Single-tooth notch cutter V 100 HM hard metal tool for cutting V-notches in plastics notch radius: 1.00 mm
75-840-216 LM Coesfeld Single-tooth cutter U 080 HM hard metal tool for cutting U-notches in plastics width of U-notch: 0.80 mm
79-014-019 Coesfeld Cutter with 2 cutting teeth hard metal for PEPA and similar material, 6 mm Ø, cutting length 25 mm
79-015-008 Coesfeld Cooling unit up to -20°C for compressed air
79-015-009 Coesfeld Magnet valve for software control handling of 79-015-008
79-024-100 Coesfeld Extension module for samplenotching only for initial equipment of CNC Milling Machine. motor with bevel gear and fixturincl. tool holder
79-101-004 Coesfeld Plate for mounting samplmagazinesincl. Quick action clamping elements
79-300-001 Coesfeld Luminous source for CNC Milling Machine
79-400-008 Coesfeld CNC controlled milling machine incl.. 1 x Clamping block for Milling motor, 1 x 79-024-010 Milling motor, 1 x 79-029-001 Collet chuck 3 mm for milling motor, 1 x 79-029-004 Collet chuck 6 mm for milling motor, 1 x 79-029-007 Collet chuck 8 mm for milling motor, 1 x 6-102-108 NCP-Interpreter RemoteWIN, incl. Control unit (Software pre configured) =Coesfeld PC with TFT-Monitor keyboard and mouse, including library (milling files)