Funke

Showing 1–40 of 40 results
Part Number Manufacturer Description Actions
2.7809.2.11-52.07.00 Funke Radiator oil-air (ex. 52.08.00) Nr. 201 087 303 0 with motor 2.1060.6.77.0.00 IM B14 C140 - 90L 1,5 kW, 1500 1/min., 500 VY, 50 Hz. IP 54 Isol.kl. F with SAE flange
200 827 063 0 Funke Univex heat exchangers A 075-411 (0827063) Materials: Inner tubes CuNi10Fe Water chambers CuSn7Pb6Zn4
2009094090 Funke Heat exchanger A190720 0909499
449930 Funke Brazed plate heat exchanger TPL 01-L-36-12 serial no. 449 930 drawing no. 635 012 057 0 (old) drawing no. 635 800 826 200 (new)
623 800 804 200 Funke Brazed plate heat exchanger TPL 00-K-18-22 4 x internal thread G 1“ Exposed end plate with 4 holes
632 800 806 2 00 Funke Heat exchanger TPL 00-K-12-22
A 190-720 Funke Part Nr. 200 909 409 0 / Inner Tubes CuNi 10Fe Oil-water heat exchanger CuSn7Pb6Zn4
All products Funke FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE
AP300/2E Funke Oil and heat exchanger with thermostat 24 VCC
BCF604-O4 Funke Tube heat exchanger BCF604-O-4
DN50, NBR, FP 14-41-2-N Funke Sealing Set
FP 08-87-1-NH Funke Heat exchanger FP 08-87-1-NH 39HL + 4LL
FP 16-33-2-NH Funke Heat exanger
FP 16-35-2-NH Funke Heat exchanger Nr.400 004 667 0
FP 2010-9-1-EH-0 (ex FP 10-9-1-EH-0) Funke Heat exchanger FP 2010-9-1-EH-0 - 10.0 bar Replacement for FP 10-9-1-EH Drawing No. 400 008 583 0 Serial No. 639 073 Screwed version Plate material: 1.4404, 0.5 mm Plate mix: 4*LL + 0*HH Seals: EPDMHT DIN frame: Carbon steel Frame for up to 30 plates Paint: Standard paint, <= 150 °C, RAL 5007 Clamping bolt: Galvanized steel Hot side: 2 x flange on pipe, DN 50, stainless steel, PN 16, EN 1092-1, Type 11 Cold side: 2 x molded rubber part, DN 50, EPDMHT, for flange PN 16, EN 1092-1
FP 31-125 Funke Seal shaft
FP 31-125-1-N Funke Heat exchanger NR.617 511 122 0
FP 40-27-1-EH/V (ex.FPS-30-27-1-E/V) Funke Plate kit for heat exchanger. Panel mix:13LL. Materiale: DIN.Panel::1.4404 V4A, 316L, 0,4mm. Seal: EPDM-HAT/Viton I
FP31-125-1N/Z Funke Plaquette number 125 with gasket
FP405-71-1-N Funke Heat exchanger. Heat output 3000KW, emulsion 7000 l/min, cooling water 4530 l/min, number of plates 71, exchanging surface A=31,74 m2, emulsion side DN 200, water side DN 200, materials : plates 1.4404,seal NBR HAT. Rack in c-steel, painted RAL 5012
FPS 16-33-2-NH Funke Heat Exchanger + Spare kit
Funke Wärmetauscher Apparatebau GmbH Funke Heat exchanger type A190-720 (802790)
Guarnizioni per FP 31-125-1-N Funke Sealing Set Drawing: 317511 1220/30
Kit Guarnizioni FPS 14-41-2-N ser nr. 483466 Funke Seal set , 41 seals
MS134P6 Funke Heat exchanger type 80B2
Ric. FP16-33-2-NH Funke Rechange part Kit could be installed in FPS 14-41-2-N
TPL 00-K-008-22/IG/VE Funke Plate heat exchanger brazed SNr. 888236 / drawing no. 632 800 800 200
TPL 00-K-14-22 Funke Heat exanger
TPL 00-K-14-22 + extended endplate Funke Plate Heat exanger brazed serial-no.: 518 549 drawing-no.: old = 632 022 1960 new = 632 800 821 200 - design: 2 x female threads G 1", frontplate 2 x female threads G 1", endplate incl. extended endplate for mounting -
TPL 00-K-18-22 Funke Heat exchanger - serial number 854 438 Drawing no: 632800804200. Design: extended end plate with 4 holes4 x internal thread G1"
TPL 00-K-4-22 Funke Brazed plate heat exchanger TPL 00-K-4-22 Serial No. : 953 428 Drawing no. : 632 800 802 200 Execution: extended end plate with 4 holes 4 x female thread G1"; with wrench sizes
TPL 00-K-8-22 Funke Brazed plate heat exchanger
TPL 01-k-90-22 Funke Heat exchanger G1 1/2"
TPL 02-K-66-22 Funke Heat exchanger 4 x internal thread G2"
TPL-00-L-12-11 Funke 633 800 834 2 00 Heat exchanger TPL 00-L-12-11 soldered version Turbolenz sheets: 1.4301/solder sheets: 1.4404/Cu extended end plate with 4 holes 4 x internal thread G1" with wrench sizes Connection assignment: warm side: F1 => F3 / cold side: F4 => F2
TPL-00-L-22-11 Funke Heat exchanger TPL 00-L-22-11 soldered version Turbolenz sheets: 1.4301/solder sheets: 1.4404/Cu extended end plate with 4 holes 4 x internal thread G1" with wrench sizes Connection assignment: warm side: F1 => F3 / cold side: F4 => F2
TPL00-K-6-22 Funke Heat exchanger
TPL00-K-8-22 Funke Heat exchanger Sr.Nr. 527793; Ps max 30bar; T max 200C°; Vol 0.4L; Pt 39
TPL00-L-10-12 Funke Heat exchanger TPL 00-L-10-12 Turbolenz sheets: 1.4301/brazing sheets: 1.4404/Cu extended end plate with 4 holes 4 x internal thread G1" with wrench sizes
UNDN50NBR Funke Sealing Set DN50, NBR, suitable for FP 14-41-2-N