SMS
Showing 1–50 of 72 results
| Part Number ▲ | Manufacturer | Description | Actions |
|---|---|---|---|
| 029.232.376 | SMS | ||
| 029.365.083 | SMS | ||
| 040003329 | SMS | Gear actuator, drawing number 20761228 | |
| 20461714 | SMS | retaining ring | |
| 20754575A | SMS | Cylinder axle in high-grade steel 42CrMo4+QT | |
| 20754576 | SMS | Gear rack in high-grade steel 31CRMOV9 quanched and tempered 1230 + 190 N/mm2 | |
| 20754577 | SMS | Gear rack in high-grade steel 31CRMOV9 quanched and tempered 1230 + 190 N/mm2 | |
| 20764789 | SMS | Bolt in high-grade steel C35 | |
| 20764790 | SMS | Locking plate in high-grade steel S235JR | |
| 20764791 | SMS | Gear rack top in high-grade steel 30CrNiMo8+QT heat treat to hardn of 1000 + 200N/mm2 | |
| 20766979A | SMS | Compression spring 4 springy turn + 1,5 | |
| 20776790+20776791 | SMS | Hydraulic cylinder complete with self aligning clevis | |
| 20776795 | SMS | Wire Spring diam. 12 mm, L = 40 mm, 2,8 mm, 2° Z/MILL 7 | |
| 20776839A | SMS | Thrust plate in bronze G-CuSn7 ZnPB | |
| 20870410 | SMS | Motor | |
| 22237418 | SMS | Squeezing roll, resistant against sulfhuric acid, excluding coating, bearing and supports | |
| 22453546 | SMS | Slide Plate | |
| 22453550 | SMS | Slide Plate | |
| 22453553 | SMS | Slide Plate | |
| 22496554 | SMS | Nozzle Type: Tube; Connection: Flanged; Orifice Size: 63mm; Lenght: 2883mm | |
| 22496570 | SMS | Nozzle Type: Acid Injection; Connection: Flanged; Size: 50mm; Length: 218mm; Width: 60mm | |
| 22496579 | SMS | Nozzle Type: Tube Outlet; Connection: Flanged; Orifice Size: 200mm; Lenght: 2890mm | |
| 22496580 | SMS | Nozzle Type: Tube; Connection: Flanged; Size: 75mm; Length: 2863mm | |
| 22496594 | SMS | Nozzle Type: Tube Inlet; Connection: Flanged; Orifice Size: 200mm; Lenght: 2890mm | |
| 22504787 | SMS | Scraper Blade | |
| 22534214 | SMS | Scraper Blade | |
| 22660903 | SMS | Damper | |
| 2266093 | SMS | Damper | |
| 22759179 | SMS | Valve | |
| 22761793 | SMS | Valve Ball Inn Durchmesser:25mm; Design Rating: 10Bar; Body Material: PVDF; Softgoods: FKM | |
| 22762662 | SMS | Valve Ball Inn Durchmesser: 40mm; Design Rating:10Bar; Body Material PVDF: Softgoods FKM | |
| 22765921 | SMS | Valve Gate; Wet Oxide | |
| 22765923 | SMS | Valve Gate; Wet Oxide | |
| 22766853 | SMS | Valve Gate; Oxide Buffer Bin | |
| 22766858 | SMS | Valve Gate; Charge BIN / BINDER | |
| 22767042 | SMS | Joint | |
| 39082957 01 01 01 023 | SMS | Controller | |
| 39083.959.01.05.04 | SMS | Gauge | |
| 4 763-254 | SMS | Nozzle | |
| 44931 | SMS | Shaft seal slotted in M1-D6, 470x520x22mm according to drawing 20617745 | |
| 76x4-N | SMS | O-Ring SN 430 Viton/70 | |
| 82281/A | SMS | Belleville spring 25,4 x 50 x 3 mm | |
| All products | SMS | FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE | |
| D474400 | SMS | Driving roller D 400 x 4300 material ST52, it deposition-welding approx. 6 mm of layer strength: C = 0.34%, Mn = 1.0%, CR = 13.6%, Mo = 1.0%, Ni = 0.5%, Ti/V, hardness = 52 2 HRC, complete be installed works on, corrosion protection after TH-N 609200 | |
| DN150/PN-16-7.0 | SMS | Seal SN 922 Viton/Metal | |
| DN200/PN-16-7.0 | SMS | Seal SN 922 Viton/Metal | |
| DN200/PN16-6 SN922 | SMS | Flat seal / metal insert | |
| DN32/PN-40-4.0 | SMS | Seal SN 922 Viton/Metal | |
| DN40/PN-40-4.0 | SMS | Seal SN 922 Viton/Metal | |
| DN50/PN-40-5.0 | SMS | Seal SN 922 Viton/Metal |