Diagnostic Guide: Overheating of Hydraulic Systems
This guide provides a systematic approach to diagnosing and troubleshooting overheating in hydraulic systems. It covers the use of thermal cameras, flow meters and pressure…
Cross-cutting #MRO & Procurement
MRO procurement strategies, spare parts management, inventory optimization and supply chain.
1345 articles
Safety Light Curtain Maintenance: Alignment, Cleaning and Muting Function Verification (EN ISO 13849-1, EN 61496-1)
This practical guide provides a step-by-step guide to the maintenance of safety light curtains, including alignment (≤ 2mm deviation), cleaning of optical lenses and verification…
Ultrasonic leak detection: compressed air audits and energy savings calculations for industry
Ultrasonic leak detection is the most cost-effective method to quantify and eliminate energy loss in industrial compressed air systems. This technical reference article covers the…
Root Cause Analysis: Why Drive Belts Overheat — 5 Common Causes and Diagnostic Flowchart
1. Introduction At a cement production plant in the interior of São Paulo, an ABB MS 32 J drive assembly operating a belt conveyor failed…
Diagnosis of Erratic Sensor Readings: EMI/RFI Interference, Grounding Problems, Cable Degradation and Transmitter Failures
1. Problem Description & Scope This guide addresses diagnosing erratic readings in industrial sensors, a critical problem that affects the reliability of automation, process control…
Robot Controller Maintenance: Ventilation Filter Replacement, Backup Battery Check, and Firmware Update
This practical guide walks maintenance technicians through replacing the ventilation filter, checking the backup battery, and updating firmware on industrial robot controllers. Includes detailed procedures,…
Coupling Selection Technical Guide: Jaw, Disc, Gear and Hydrodynamic — Torque, Misalignment and Torsional Rigidity
This technical guide addresses the selection of industrial couplings (jaw, disc, gear and hydrodynamic) with a focus on torque, misalignment and torsional rigidity, in line…
Vickers 326988: Hydraulic Cartridge for Machine Tools – Specifications, Maintenance and Industry 4.0 Integration
Complete technical analysis of the Vickers 326988 hydraulic cartridge for machine tools: operating specifications at 315 bar and 60 l/min, preventive maintenance plan with intervals…
Guide to diagnosis and resolution of measurement errors in industrial flowmeters
This technical guide provides maintenance engineers with the necessary steps to diagnose and resolve measurement errors in industrial flowmeters, focusing on the detection of installation…
Practical Guide to Inspection and Testing of Steam Traps: Ultrasonic, Thermal and Visual Methods for Fault Detection
Scope & Purpose This guide covers the inspection and testing of mechanical, thermostatic and thermodynamic steam traps in industrial steam systems (0.5–40 bar, 110–250 °C)…