Diagnosis and Remedy of Cavitation in Hydraulic Pumps
1. Probleembeschrijving en Omvang Cavitatie in hydraulische pompen is een kritiek defect dat leidt tot versnelde slijtage, verlies van efficiëntie en in ernstige gevallen catastrofale…
Cross-cutting #MRO & Procurement
MRO procurement strategies, spare parts management, inventory optimization and supply chain.
3709 articles
Waterhammer Check Valves Diagnosis and Resolution Guide: Slam and Transient Analysis
This guide presents a practical approach to diagnosing water hammer in check valves, focusing on analyzing pressure data, checking closing mechanisms, and selecting damping solutions.…
Control valves in pulp and paper plants: Application of DANFOSS 131B0038 according to UNE-EN regulations
Introduction: MRO Challenges in the Paper Industry Pulp and paper production is a continuous process that operates 24/7 with tight margins. According to data from…
Technical Diagnostic Guide: Obstruction and Overload in Chain Conveyors
Technical guide to diagnose and resolve blockages and overloads on chain conveyors through systematic inspection for wear, lubrication, and material buildup.
Evolution of HMI: from push buttons to multitouch panels in the aerospace and energy industry
Introduction In 2026, the human-machine interface (HMI) represents a critical link in the operation of industrial installations, particularly in the aerospace and energy sectors where…
Technical guide to the diagnosis of misalignment in industrial conveyor belts
Systematic analysis of conveyor belt misalignment with a diagnostic approach focused on loading, joints and drum alignment. Operating procedures to restore the reliability of the…
Modernization of Hydraulic Systems: Proportional Valves and Servo Pumps for Efficiency in the Machine Tool Industry
Introduction: Modernization Imperative in Industrial Hydraulics The manufacturing industry, particularly the machine tool sector, faces increasing pressure to optimize operational efficiency, reduce energy costs and…
Fault diagnosis: Overheating of control cabinets - thermography, harmonics and contact resistance
1. Problem Description & Scope Overheating of Low Voltage Switchgear Assemblies (NSHV) and Motor Control Centers (MCC) is a critical failure symptom indicating serious electrical…
Practical Guide to Maintenance on Labeling Machines: Sensor Adjustment, Peeling Edge and Adhesive Roller Cleaning
1. Scope and Purpose This practical guide details essential maintenance procedures for industrial labeling machines, focusing on inspection, cleaning and adjustment of the label sensor,…
Motor Current Signature Analysis (MCSA): Detection of Rotor Bar and Eccentricity Faults in Industrial Electric Motors
1. Introduction: The importance of early fault detection in electric motors Electric motors form the backbone of industrial production processes in the Benelux region, with…