Industrial Coupling Selection Guide: Jaw, Disc, Gears and Fluids
This white paper details industrial coupling selection guidance, addressing types such as jaw, disc, gear, and fluid. Examines design criteria such as torque, misalignment, and…
Technical Articles
Technical Articles
Follow the latest news of the sector on our site. Technical articles about industrial components, supply chain optimization, and procurement best practices.
Power Factor Correction: Capacitor Banks, Derating Reactors and Active PFC Solutions – Complete Technical Guide for the Aerospace and Energy Industry
1. Introduction In industrial facilities in the aerospace and energy sectors, electrical power quality is a critical factor for equipment reliability and energy efficiency. A…
Recirculating ball linear guides vs roller guides: load capacity, precision and preload in machining centers
Comparative technical analysis between linear ball bearing guides and roller guides for machine tools: dynamic load capacity, rigidity, preload classes and selection criteria according to…
Linear rail systems: recirculating ball guide vs. roller guide – load capacity, accuracy and preload
The selection of suitable linear rail systems such as recirculating ball guides and roller guides is crucial for precision and reliability in mechanical engineering. This…
Level Measurement Technologies: Radar, Ultrasonic, Capacitive, and Hydrostatic – A Comparative Engineering Reference
This technical reference compares radar, ultrasonic, capacitive, and hydrostatic level measurement technologies, providing engineering criteria for selection, installation best practices, and failure mode analysis. Includes…
Motor Current Signature Analysis (MCSA): Detection of Rotor Bar and Eccentricity Faults in Industrial Electric Motors
1. Introduction: The importance of early fault detection in electric motors Electric motors form the backbone of industrial production processes in the Benelux region, with…
Industrial Oil Analysis for Machinery Health: Wear Metals, Contamination and Lubricant Degradation
1. Introduction: The Challenge of Operational Reliability In the manufacturing sector, machinery reliability is a critical factor that directly impacts productivity and profitability. Unexpected failures…
O-ring material selection: NBR, FKM, EPDM, FFKM — Chemical compatibility and thermal limits
In-depth technical analysis of selection criteria for NBR, FKM, EPDM and FFKM O-rings. This guide details chemical compatibility, thermal limits and sizing rules according to…
Reliability Centered Maintenance (RCM): Systematic Approach to Maintenance Strategy Optimization
Reliability-Centered Maintenance (RCM) according to SAE JA1011 allows you to select the optimal maintenance strategy for each failure mode, based on the real consequences and…
Industrial waste heat utilization: optimization through ORC systems and heat exchangers
This technical reference article highlights the potential of industrial waste heat utilization in the DACH region. He studies the application of Organic Rankine Cycle (ORC)…
ATEX Certification for Equipment in Explosive Atmospheres: Zones, Categories, and Marking
1. Introduction Explosive atmospheres present severe operational and safety risks in industrial manufacturing. Facilities processing chemicals, petrochemicals, pharmaceuticals, and agricultural dust operate environments where a…
Effective protection of electric motors: from thermal relays to intelligent control systems
Technical manual for the selection and operation of motor protection relays (thermal, electronic and intelligent) to ensure the reliability of industrial equipment.