Roemheld

Showing 1–20 of 20 results
Part Number Manufacturer Description Actions
1873105 Roemheld Pneumatic swing clamp flange above, double-acting. Connection with O-ring seal, piston Ø 20 mm, piston rod Ø 8 mm, clamping stroke 7 mm, swivel stroke 7.5 mm, swivel angle 90 ° right max. 7 bar, as per data sheet J7.203
18931191VI Roemheld ROTATING LOCK CYLINDER 1893 1191 VI Swing clamp, block design, double acting, rotation angle 0 °, piston Ø 25/20 x 14 mm stroke, Execution according to technical data sheet B1.890, similar to 1893-646, however without overload protection, with reinforced swivel mechanism, Piston with index groove, with metal scraper, Bleed screws G 1/8 KDS on the "left" side, according to installation drawing E18931191VI, maximum working pressure 500 bar
18931196VI Roemheld Schwenkspanner, Blockausführung, doppelt wirkend, Schwenkwinkel 0°, Kolben-Ø 25/20 x 14 mm Hub, Ausführung gemäß Katalogblatt B1.890, ähnlich 1893-646, jedoch ohne Überlastsicherung, mit verstärkter Schwenkmechanik, Kolben mit Indexiernut, mit Metallabstreifer, G 1/8 KDS-Entlüftungsschrauben seitlich "rechts", nach Einbauzeichnung E18931196VI, max. Betriebsdruck 500 bar
1896-504 Roemheld .
1896-604 Roemheld .
1897-404 Roemheld .
1897-408 Roemheld .
1897-504 Roemheld .
1897-534 Roemheld .
1942967 Roemheld Screw-in support element, double-acting Bolt 16x 22 mm stroke, similar to 1942107 ccording to data sheet B1.9402but total stroke 22 mmspring stroke 8 mm olding force 2.5 kN at 200 bar operating pressure total lenght 132mm
1942974 Roemheld Swing clamp, block design, double-acting, swivel angle 0°, piston Ø 25/20 x 14 mm stroke, Execution according to data sheet B1.890, similar to 1893-646, however without overload protection, with reinforced swivel mechanism, Piston with indexing groove, with metal scraper, G 1/8 KDS bleed screws on the side "left", according to installation drawing E18931191VI, maximum operating pressure 500 bar
2951420 Roemheld Non-return valve, pilot operated, flanged version, with pre-relief, max. 50 l/min, max. 500 bar
53722899 Roemheld ROTARY LOCKING CYLINDER 1893 1224 VI
53722910 Roemheld Screw-in support element M30 x 1.5 mm double-acting metal scraping edge Bolt Ø 16 mm, bolt stroke 15 mm maximum load force 9.5 kN Application with spring force maximum 500 bar.
9730-500 Roemheld Roemheld pressure switch 9730-500 Article 9730-300 was replaced by 9730-500
RR000-100 Roemheld ROEMHELD BLOCKZYLINDER 1550106H20
RR000-100 Roemheld ROEMHELD CLUTCH NIPPLE 0460-637
RR000-100 Roemheld ROEMHELD CLUTCH NIPPLE 0460-637
RR000-100 Roemheld ROEMHELD coupling nipple 0460-736
RR000-100 Roemheld RR000-100