Expert articles in root cause analysis: investigation of failures and prevention strategies.
The failure of the SKF 23022CC/W33 shaft key revealed design, tolerance and lubrication issues. An in-depth analysis identified root causes and provided practical solutions to…
Hydraulic cylinder seal damage can be caused by contamination, misalignment or pressure peaks. A systematic research method and technical tools help determine the cause. For…
Forensic analysis of pitting and spalling failures in Parker E321G3906 industrial reducer gears, addressing causes of lubrication, alignment and material fatigue.
Overheating a servo motor can lead to critical failures. This analysis identifies root causes, including sizing errors, duty cycle miscalculation, and cooling failure. Corrective actions…
Gearbox oil leakage is a costly failure mode. This article analyzes seal selection, venting, and assembly errors using real failure data and offers practical solutions…
Defects on the gears can cause the mechanism to malfunction. This can be avoided by performing regular lubrication checks, centering and material analysis. Use the…
Fatigue wear of VICKERS Linear Rails 5996605-001 can cause production to stop. The analysis showed that the main causes are contamination, preload errors and lubrication…
Wear on linear guides such as the ZB4BR216 is mainly due to contamination, pressing errors and lubrication deficiencies. Early identification of warning signs is key…
Thermal relay nuisance tripping can lead to significant downtime. This article identifies key root causes and provides a practical checklist for resolution.
Premature failure of Bosch 0822010221 spherical roller bearings was analyzed to identify root causes. Temperature, vibration and visual inspection measurements identified critical anomalies.
A premature failure of a Festo 574479 spherical roller bearing was analyzed to identify root causes and implement corrective measures. The failure was attributed to…
REXROTH QV-06/24/60 key joint chipping causes production stoppage. Analysis indicates insufficient clearance, cyclic loading and material fatigue. The use of components that meet the standards…
