Gearbox maintenance, belt and chain drives, couplings and power transmission systems.
262 articles
A Heidenhain 329991-50 coupling failed after 4,200 hours due to misalignment, torque overload, and fatigue. This article provides a root cause analysis and corrective actions…
Ball screw backlash increase is a critical issue in precision motion control systems. This article investigates the root causes of backlash increase, focusing on preload…
Oil leakage in the gearbox can occur due to improper selection of seals, ventilation and assembly errors. Performing diagnostics, replacing components, and establishing a prevention…
The Parker ME10/30 plays a crucial role in energy production. Reliability can be increased with predictive maintenance and efficient replacement part management. Discover the components…
The Pressure Equipment Directive (PED) is essential for industrial safety. Compliance with standards such as NBR 15200 and INMETRO guarantees safe operation. UNITEC-D offers certified…
Servo motors overheat due to incorrect dimensions, load cycle and limited air circulation. The root causes are identified and corrective measures offered. Consult the UNITEC-D…
A forensic root cause analysis of tooth flank pitting and spalling in an industrial reduction gearbox. The research links alignment errors, inadequate lubricant film and…
A root cause analysis of ball screw backlash increase in a Festo 536271 assembly reveals contamination, lubrication failure, and preload loss as primary drivers. Field…
This analysis investigates persistent oil leakage in Parker B818210525415 industrial gearboxes, identifying suboptimal seal selection, compromised venting, and assembly errors as primary root causes. It…
Transmission belts often overheat due to insufficient tension, misalignment, or overload. This article analyzes five main causes with measurement data, diagnostic checklists and prevention strategies…
