Gearbox maintenance, belt and chain drives, couplings and power transmission systems.
278 articles
The Pressure Equipment Directive (PED) is essential for industrial safety. Compliance with standards such as NBR 15200 and INMETRO guarantees safe operation. UNITEC-D offers certified…
Servo motors overheat due to incorrect dimensions, load cycle and limited air circulation. The root causes are identified and corrective measures offered. Consult the UNITEC-D…
A forensic root cause analysis of tooth flank pitting and spalling in an industrial reduction gearbox. The research links alignment errors, inadequate lubricant film and…
A root cause analysis of ball screw backlash increase in a Festo 536271 assembly reveals contamination, lubrication failure, and preload loss as primary drivers. Field…
This analysis investigates persistent oil leakage in Parker B818210525415 industrial gearboxes, identifying suboptimal seal selection, compromised venting, and assembly errors as primary root causes. It…
Transmission belts often overheat due to insufficient tension, misalignment, or overload. This article analyzes five main causes with measurement data, diagnostic checklists and prevention strategies…
The transition from batch to continuous processes is critical for industrial efficiency. This technical guide details the evaluation of legacy systems, the financial impact (ROI)…
This article presents a root cause analysis of gear tooth pitting and spalling in industrial transmissions, focusing on lubrication degradation, shaft misalignment, and material fatigue.…
This forensic analysis investigates the root causes of pitting and spalling failure in a Festo M22140006 actuator. Misalignment and lubricant degradation are identified as critical…
Analysis of the causes of premature wear of chain gears and sprockets. A practical guide to diagnostics, technical standards and maintenance recommendations for industrial systems.
