Inventory Optimization and Warehouse Layout in MRO: Picking Efficiency and 5S
Optimizing warehouse layout and picking is crucial to reducing costs and increasing the availability of MRO parts. By applying 5S and ABC classification, it is…
Method #Preventive Maintenance
Preventive and predictive maintenance strategies to maximize equipment uptime and reliability.
2029 articles
Root Cause Analysis of Coupling Failures: Misalignment, Torque Overload and Fatigue Fracture
The Allen Bradley 871C-DT10NP30-U2 coupling failed after 14,500 hours due to misalignment, torque overload and fatigue. This analysis identifies root causes and proposes practical solutions…
Compliance with REACH and RoHS standards: Practical guide for industrial maintenance in France
Compliance with REACH and RoHS standards is crucial for maintenance operations in the aerospace and energy sectors. Companies must adopt rigorous processes to ensure the…
Modernization guide: from manual to centralized lubrication systems
Modernizing from manual to centralized lubrication systems optimizes efficiency and reduces costs. The use of components such as the REXROTH 5340051010 ensures regulatory compliance and…
Shaft Key Failure: Root cause analysis through load, fit and fatigue under cyclic load
Analysis of the failure of a set of screws in the transmission module identified three main causes: increased cyclic load, inaccurate fit and excessive speed.…
Gear Tooth Pitting and Spalling: Root Cause Analysis and Preventive Measures
Gear tooth pitting and spalling in SKF S7014 ACEGA/HCP4A gears are caused by lubrication contamination, misalignment, and material fatigue. This article provides a systematic root…
Upgrade of the electric drive system: replacement of old motors with highly efficient IE4/IE5 models
Replacing old motors with IE4/IE5 models provides energy savings and increased efficiency. The use of highly efficient motors complies with EN, ISO and DSTU standards.…
Compliance with Standards and Safety in MRO: ISO 13849-1 and Calculation of Performance Level (PL)
ISO 13849-1 is essential for safety in industrial automation. Learn how to calculate PL and ensure compliance with ABNT and INMETRO standards. Access the UNITEC-D…
Maintenance Guide for a Welding Station: FIBRO 241.14.10.038
A FIBRO 241.14.10.038 soldering station requires rigorous maintenance to ensure its reliability. This guide offers a maintenance schedule, critical spare parts, and tips for optimal…
Root Cause Analysis of Joint Failures: Alignment, Torque Overload and Fatigue Fracture
An ABB RN13076101307610 coupling was analyzed to identify the root causes of a failure. The main causes are torque overload, incorrect alignment and lubricant degradation.…