Gega
Showing 1–21 of 21 results
| Part Number ▲ | Manufacturer | Description | Actions |
|---|---|---|---|
| 05385024 | Gega | Intake complete with 3 nozzle 05385031 | |
| 0550-0880-/B | Gega | Flow control valve nominal diameter (DN) 1/2 IN, connection by screw thread BSP fluid gas + oxygen, 220 V, 60 Hz., with manometer 0 to 4 Bar for cut machine CC-2002-M-1011705 IT 19 (Rev. A) CC2002-M-1012336 IT 19 (Rev. B) K00935-030, K00935-33 | |
| 100488 | Gega | 6-pin male insert (BU) STA.6.SS1 | |
| 102609 | Gega | Membrane complete. VK002 (old IP 4664A). Weight: 0.015 kg / pc | |
| 102615 | Gega | Diaphragm spring, VL004 (old IP3676A). Weight: 0.001 kg / pc. | |
| 107443 | Gega | Safety valve SV 221.04-8,0 bar G3 / 4 | |
| All products | Gega | FLENDER COUPLINGS ARPEX K430 CEF 235 (1) C FLANGE (2) F FLANGE | |
| DAPE-0350.06222.00 | Gega | SSB synchronous motor 0350.06222 | |
| K2004-030-008 | Gega | Valve for oxygen K20/B Complete 24VDC | |
| K2004-030-008A | Gega | Seal kit for valve | |
| K2004-030-012A | Gega | Seal kit for valve K20 | |
| K2004-030-016 | Gega | Valve for gas K20/A Complete 24VDC | |
| K2004-030-016A | Gega | Seal kit for valve K20 | |
| K2004-034-032 | Gega | Hose for powder, PTFE DN 10 x 5700, press-fit, both sides | |
| K2004-034-033 | Gega | Hose for powder, PTFE DN 10 x 5700, press-fit, both sides | |
| LG/GRM G 3/8 RH | Gega | Safety device for heating oxygen (article 106548) | |
| LG/GRM/D G 1/2 LH | Gega | Safety device for gas (article 107803) | |
| Massa | Gega | Ground for welding machine | |
| SDK1-L200 | Gega | Nozzle cut capacity 260,00 mm, cut width 15,00 mm to 25,00 mm, cut thickness 50,00 mm to 450,00 mm, gas consumption 54 to 70 BM3/H,A, application emergency torch model SBK 750-2000 | |
| SDS-26F | Gega | Cutting nozzle SDS 26 F. Weight 0.14 kg / piece. Item 108183 | |
| SDS26FP | Gega | Cutting nozzle SDS 26 FP, Article: 108189. Weight: 0.17 kg / pcs |