Hach
Showing 1–25 of 25 results
| Part Number ▲ | Manufacturer | Description | Actions |
|---|---|---|---|
| 2088516-01 | Hach | Mc KIT CONFIGURATION SETUP | |
| 2088600-485 | Hach | MODEL 6000 SERIAL RS-485 CONFIGURATION | |
| 2088615-SF-S | Hach | Aa_ASSY, R6015, .5uM, 1CFM, SIDE EXHAUST, W / FLOW, SERIAL | |
| 2167500 (ex. 2167502) | Hach | Test Kit, TZ-1 230/50 UV Lamp Weight: 5,0 Kg | |
| 2283549.99 | Hach | PH buffer solution, yellow pH 7.00 +/- 0.02 at 25°C (500ml) NIST Shelf life: 18 months Weight: 0.54kg | |
| 25M1A1025-115 | Hach | EQUI TRANSFERRANT PH7 BUFFER, 500ML 500ML WATER,pH | |
| 2660153 | Hach | STABLCAL STD, 20 NTU 1000ML | |
| 57911-00 | Hach | Replacement Sensor cap for process LDO | |
| 58112-00 | Hach | LDO sensor cap for INTELLICAL LDO e with update module | |
| 6135200 | Hach | 5740 sc Replacement Cartridge incl. Galvanic sensor and o-rings | |
| 6867000 | Hach | 2nd Generation COLORIMETER ASSY, 510NM, CL17 Gewicht:0.180 Kg | |
| 8753800 | Hach | SD900 Port/Ref Pump Tube, Pre cut | |
| 9021150 | Hach | Replacement sensor cap kit for LDOsc (model 2). Weight: 0,13 kg | |
| C40101 | Hach | Intellical CDC401 Laboratory 4-Poles Graphite Conductivity Cell, 0.0 ?S / cm - 200 mS / cm; accuracy ± 0.5% of range; 1 m cable Gewicht: 0.372 Kg | |
| LXV423.99.00100 | Hach | SOLITAX ts-line sc probe with stainless steel body and wiper | |
| LXV431.99.00001 ex.(LXV431.99.00002) | Hach | Sonatax sc probe with 10m cable,Sludge level meter for online measuring of sludgelevel in primaryandsecondary clarifiers. The probe are equipped with an wiper forAutomatic cleaning. | |
| LXV431.99.00002 | Hach | Sonatax sc Hach, sludge level sensor with wiper, V4A | |
| LZW 5293.97.000.2 | Hach | Sension Plus 5293 Platinum conductivity cell | |
| LZX971 | Hach | Plug sc-probe cable 5-pole, IP67 (6-8 mm) | |
| LZX972 | Hach | Sleeve SC-sensor cable 5-pole, IP67 (6-8 mm) | |
| PHC101-01 | Hach | Intellical PHC101 Laboratory Low Maintenance Gel Filled pH Electrode, 1 m Cable Measuring range: pH 2 - 14 Accuracy: ±0.02 pH Temperature range: 0 - 50 °C (32 - 122 °F) Sensor material: Epoxy Dimensions: 175 mm x 12 mm (6.89 in. x 0.47 in.) Weight: 0,92 kg | |
| PHC10101 | Hach | PH GEL PROBE, STD, w/1m cable, for waste water | |
| PHC72501 | Hach | PHC725 pH PROBE, RED-ROD, GLASS, GEN PURP, STD | |
| SB-P1SV | Hach | PEEK Salt Bridge, Kynar OJ Equi-Tr Fill, Viton O Weight: 0.088kg | |
| YAB024 | Hach | Termination board sc1000 ZBA753 |